LK Automation Limited
HC-KF23B MITSUBISHI HC-KF23B Single axis positioning built-in driver
Brand:
MITSUBISHI
Name: Low inertia small capacity motor
Model: HC-KF23B
Motor series: low inertia, small capacity.
Using a serial absolute / incremental encoder.
Rated output power: 0.2kw.
Rated speed: 3000rpm.
With the brake with brake.
Without GB.
Shaft end: straight shaft.
A servo motor is an engine that controls the operation of the mechanical components in the servo system.
Servo motor can make the control speed, position accuracy is very accurate, can be converted to torque and speed voltage signals to drive the control object.
Servo motor rotor speed is controlled by the input signal, and can quickly response,
In the automatic control system, used as actuators, and electromechanical time constant, high linearity, initiating voltage characteristics,
The signal can be converted into a motor shaft on the angular displacement or angular velocity output.
Divided into DC and AC servo motor two major categories, the main features are,
When the signal voltage is zero, there is no rotation,
The speed increases with the increase of the torque and the speed decreases.
...More relevant models >>>>
Name: Low inertia small capacity motor
Model: HC-KF23B
Motor series: low inertia, small capacity.
Using a serial absolute / incremental encoder.
Rated output power: 0.2kw.
Rated speed: 3000rpm.
With the brake with brake.
Without GB.
Shaft end: straight shaft.
A servo motor is an engine that controls the operation of the mechanical components in the servo system.
Servo motor can make the control speed, position accuracy is very accurate, can be converted to torque and speed voltage signals to drive the control object.
Servo motor rotor speed is controlled by the input signal, and can quickly response,
In the automatic control system, used as actuators, and electromechanical time constant, high linearity, initiating voltage characteristics,
The signal can be converted into a motor shaft on the angular displacement or angular velocity output.
Divided into DC and AC servo motor two major categories, the main features are,
When the signal voltage is zero, there is no rotation,
The speed increases with the increase of the torque and the speed decreases.
Motor series: medium inertia, medium power.
Rated output power: 3.5kw.
Rated speed: 2000r/min.
Whether to bring the brakes: with.
Shaft end: Standard (straight).
Protection level: IP65 (IP67).
Features: medium inertia from low speed to high speed three modes for selection, suitable for different applications MITSUBISHI HC-KF23B.
Application examples: transmission machinery, robots, X-Y working platform HC-KF23B
High resolution encoder 131072p/rev (17 bit).
The encoder with high resolution ensures excellent performance and stability at low speed.
All motor dimensions are the same as before and all are compatible with the wiring. MR-J2M multi axis servo amplifier.
Interface type: compatible with SSCNET high speed serial bus MITSUBISHI HC-KF23B.
The servo control system is a kind of operating system which can automatically control the mechanical movement of the test device according to the predetermined requirements.
In many cases, refers to the servo system is to control the amount of (the system output) is a feedback control system of mechanical displacement or displacement velocity and acceleration,
Its function is to make the output of the mechanical displacement (or rotation angle) to accurately track the input displacement (or rotation angle) MITSUBISHI HC-KF23B.
The structural composition of the servo system and other forms of feedback control systems are not distinguished in principle. Servo motor series: medium inertia, small capacity.
Rated output: 0 MITSUBISHI Single axis positioning built-in driver. 85kw.
Rated speed: 1000r/min.
Electromagnetic brake: No.
Power supply: 200V.
Stable driving of medium capacity and medium inertia type products MITSUBISHI Single axis positioning built-in driver.
Through the optimization of structural design, to achieve the minimum length of the industry.
High speed & high torque. Shorten the positioning time, achieve high-speed equipment.
Reducing the electric torque ripple.
Through the combination of the optimal number of the motor and the slot number, the torque ripple is greatly reduced,
To further realize the smooth constant speed device MITSUBISHI Single axis positioning built-in driver.
Improve the environmental performance of HGG-SR, HG-JR series of products using IP67 HC-KF23B. Interface power supply: 24VDC plus or minus 10%.
Digital input: 30 points, optocoupler isolation, drain / source type support.
Digital output: 16 points, optocoupler isolation, drain / ssource type support MITSUBISHI HC-KF23B.
Analog input: 2 channels, 0 to plus or minus 10VDC (input impedance: 10~12k).
Analog output: 2 channels, 0 to plus or minus 12VDC.
Rated output power: 3.5kw.
Rated speed: 2000r/min.
Whether to bring the brakes: with.
Shaft end: Standard (straight).
Protection level: IP65 (IP67).
Features: medium inertia from low speed to high speed three modes for selection, suitable for different applications MITSUBISHI HC-KF23B.
Application examples: transmission machinery, robots, X-Y working platform HC-KF23B
High resolution encoder 131072p/rev (17 bit).
The encoder with high resolution ensures excellent performance and stability at low speed.
All motor dimensions are the same as before and all are compatible with the wiring. MR-J2M multi axis servo amplifier.
Interface type: compatible with SSCNET high speed serial bus MITSUBISHI HC-KF23B.
The servo control system is a kind of operating system which can automatically control the mechanical movement of the test device according to the predetermined requirements.
In many cases, refers to the servo system is to control the amount of (the system output) is a feedback control system of mechanical displacement or displacement velocity and acceleration,
Its function is to make the output of the mechanical displacement (or rotation angle) to accurately track the input displacement (or rotation angle) MITSUBISHI HC-KF23B.
The structural composition of the servo system and other forms of feedback control systems are not distinguished in principle. Servo motor series: medium inertia, small capacity.
Rated output: 0 MITSUBISHI Single axis positioning built-in driver. 85kw.
Rated speed: 1000r/min.
Electromagnetic brake: No.
Power supply: 200V.
Stable driving of medium capacity and medium inertia type products MITSUBISHI Single axis positioning built-in driver.
Through the optimization of structural design, to achieve the minimum length of the industry.
High speed & high torque. Shorten the positioning time, achieve high-speed equipment.
Reducing the electric torque ripple.
Through the combination of the optimal number of the motor and the slot number, the torque ripple is greatly reduced,
To further realize the smooth constant speed device MITSUBISHI Single axis positioning built-in driver.
Improve the environmental performance of HGG-SR, HG-JR series of products using IP67 HC-KF23B. Interface power supply: 24VDC plus or minus 10%.
Digital input: 30 points, optocoupler isolation, drain / source type support.
Digital output: 16 points, optocoupler isolation, drain / ssource type support MITSUBISHI HC-KF23B.
Analog input: 2 channels, 0 to plus or minus 10VDC (input impedance: 10~12k).
Analog output: 2 channels, 0 to plus or minus 12VDC.
...More relevant models >>>>