LK Automation Limited
H3CR-H Series Solid-state Power OFF-delay Timers OMRON H3CR-H Series
Brand:
OMRON
Name: Solid-state Power OFF-delay Timers
Model: H3CR-H Series
DIN 48 X 48-mm Power OFF-delay Timer.
Long power OFF-delay times;
S-series: up to 12 seconds,
M-series: up to 12 minutes.
Models with forced-reset input are available.
11-pin and 8-pin models are available.
...More relevant models >>>>
Name: Solid-state Power OFF-delay Timers
Model: H3CR-H Series
DIN 48 X 48-mm Power OFF-delay Timer.
Long power OFF-delay times;
S-series: up to 12 seconds,
M-series: up to 12 minutes.
Models with forced-reset input are available.
11-pin and 8-pin models are available.
Operation / reset system: time limit operation / auto reset.
Time limit contact: DPDT.
Time range: 0.1s ~ 30min.
Supply voltage: AC110V, AC220V (50/60Hz); DC24V.
Mounting: surface /DIN guide rail mounting (with socket).
Micro timer compatible with MY relay.
ON delay function, can accurately control the time OMRON H3CR-H Series.
Large and transparent time setting knob is easy to set up time H3CR-H Series
Pin configuration compatible with MY power relay.
Access to UL, CSA and CCC certification in line with EN61812-1 and EMC standards. Input type: NPN/ voltage pulse input type.
Event input terminal 5 points (S-TMR, HOLD, RESET) is equipped with.
External power 80mA DC12V.
Note: K3HB-RPB-A, K3HB-RNB-A is not equipped with event input OMRON H3CR-H Series.
No output: -.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
Digital rotating pulse meter with high speed measurement for 50kHz.
Action determine the color, can switch the green / Red 2 kinds of color display.
Measurement of 50kHz high speed pulse.
Rotary encoder and a variety of ON/OFF pulse signals, the most up to 50kHz of high-speed pulse measurement OMRON H3CR-H Series.
Rotation measurement of high speed rotating objects can be carried out. Preset stage: 3-stage setting.
Nameplate lettering: English.
Nine Built-in Counters/Timers to.
Measure Equipment Operating.
Cycles and Times and Forecast.
Maintenance Timing.
Provides up to nine counters or accumulative timers OMRON Solid-state Power OFF-delay Timers.
(Counter and timer functions can be used at the same time.)
Individual forecast outputs to indicate maintenance timing OMRON Solid-state Power OFF-delay Timers.
Pre-forecast display and machine stoppage output provided.
IP54 oil-proof type at setting area for resistance to oil and water.
Separate digit keys to easily change settings.
Compact, short-body: 72 × 72 × 79 mm (DIN).
Key protection function prevents incorrect operation OMRON Solid-state Power OFF-delay Timers.
Multiple outputs: NPN/PNP.
Directly connectable to 2-wire DC sensors.
Complies with UL and CSA. Control mode: Sunshine mode / timer mode.
Outage compensation: there.
Power supply voltage: AC100 ~ 200V.
Installation method: DIN guide rail / protocol / surface mount.
Control output: 1C * 1 ciircuit H3CR-H Series.
Daylight control time switch.
Rotary device with a display unit, which is always capable of reading from the front.
Accord with JIS protocol size.
There is no need to adjust the time of sunrise and sunset in support oof daylight saving time when the seasons change OMRON H3CR-H Series.
5 modes of operation. (4 kinds of Sunshine Action)
With automatic reset function, to prevent misuse.
Time limit contact: DPDT.
Time range: 0.1s ~ 30min.
Supply voltage: AC110V, AC220V (50/60Hz); DC24V.
Mounting: surface /DIN guide rail mounting (with socket).
Micro timer compatible with MY relay.
ON delay function, can accurately control the time OMRON H3CR-H Series.
Large and transparent time setting knob is easy to set up time H3CR-H Series
Pin configuration compatible with MY power relay.
Access to UL, CSA and CCC certification in line with EN61812-1 and EMC standards. Input type: NPN/ voltage pulse input type.
Event input terminal 5 points (S-TMR, HOLD, RESET) is equipped with.
External power 80mA DC12V.
Note: K3HB-RPB-A, K3HB-RNB-A is not equipped with event input OMRON H3CR-H Series.
No output: -.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
Digital rotating pulse meter with high speed measurement for 50kHz.
Action determine the color, can switch the green / Red 2 kinds of color display.
Measurement of 50kHz high speed pulse.
Rotary encoder and a variety of ON/OFF pulse signals, the most up to 50kHz of high-speed pulse measurement OMRON H3CR-H Series.
Rotation measurement of high speed rotating objects can be carried out. Preset stage: 3-stage setting.
Nameplate lettering: English.
Nine Built-in Counters/Timers to.
Measure Equipment Operating.
Cycles and Times and Forecast.
Maintenance Timing.
Provides up to nine counters or accumulative timers OMRON Solid-state Power OFF-delay Timers.
(Counter and timer functions can be used at the same time.)
Individual forecast outputs to indicate maintenance timing OMRON Solid-state Power OFF-delay Timers.
Pre-forecast display and machine stoppage output provided.
IP54 oil-proof type at setting area for resistance to oil and water.
Separate digit keys to easily change settings.
Compact, short-body: 72 × 72 × 79 mm (DIN).
Key protection function prevents incorrect operation OMRON Solid-state Power OFF-delay Timers.
Multiple outputs: NPN/PNP.
Directly connectable to 2-wire DC sensors.
Complies with UL and CSA. Control mode: Sunshine mode / timer mode.
Outage compensation: there.
Power supply voltage: AC100 ~ 200V.
Installation method: DIN guide rail / protocol / surface mount.
Control output: 1C * 1 ciircuit H3CR-H Series.
Daylight control time switch.
Rotary device with a display unit, which is always capable of reading from the front.
Accord with JIS protocol size.
There is no need to adjust the time of sunrise and sunset in support oof daylight saving time when the seasons change OMRON H3CR-H Series.
5 modes of operation. (4 kinds of Sunshine Action)
With automatic reset function, to prevent misuse.
...More relevant models >>>>