LK Automation Limited
H3BH-N8 Solid-state Power OFF-delay Timer OMRON H3BH-N8 Panel Covers (order separately) to enable various panel designs
Brand:
OMRON
Name: Solid-state Power OFF-delay Timer
Model: H3BH-N8
Output: DPDT.
Supply voltage: 110 VAC (50/60 Hz); 220 VAC (50/60 Hz).
Timer: S-series; M-series.
Long power OFF-delay times;
S-series: up to 12 seconds,
M-series: up to 12 minutes.
Setting rings (order separately) to enable consistent,
settings and to limit the setting range.
Panel Covers (order separately) to enable various panel designs.
Approved by UL, CSA, CE and CCC.
...More relevant models >>>>
Name: Solid-state Power OFF-delay Timer
Model: H3BH-N8
Output: DPDT.
Supply voltage: 110 VAC (50/60 Hz); 220 VAC (50/60 Hz).
Timer: S-series; M-series.
Long power OFF-delay times;
S-series: up to 12 seconds,
M-series: up to 12 minutes.
Setting rings (order separately) to enable consistent,
settings and to limit the setting range.
Panel Covers (order separately) to enable various panel designs.
Approved by UL, CSA, CE and CCC.
Supply voltage: 24 VDC.
Output: Contact output (SPDT).
Contact output (SPDT): No communications.
A DIN 48 × 24 Preset Counter.
Compact, Yet Equipped with.
Communication.
Only 48 × 24 × 83 mm (W × H × D),
Switch between 4-digit preset counter and 4-digit timer operation.
While using the preset counter, it is possible to switch the,
display to monitor the totalizing count value (8 digits) OMRON H3BH-N8 H3BH-N8
Built-in prescaling for counter operation.
ON/OFF-duty adjustable flicker mode that can be used to per,
form cyclic control is available for timer operation.
SV can be changed using front panel keys to any of four values,
preset in SV-banks.
Water-proof structure to NEMA4X/IP66.
Conforms to UL, CSA, and IEC safety standards as well as CE Marking OMRON H3BH-N8. Type of input: AC current input.
Output type: linear; current; NPN open collector (HH, H, PASS, L, LL).
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC100 ~ 240V.
96 (W) * 48 (H * 95mm) depth
Some models are not equipped with.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table OMRON H3BH-N8.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations OMRON Solid-state Power OFF-delay Timer.
DeviceNeEasy to Use and Easy to Read.
Basic Features.
Character height of 10 mm for better readability OMRON Solid-state Power OFF-delay Timer.
Operation is simplified by the Up/Down Keys for each digit on 4-digit.
Safety and Reliability.
Power supply circuit and input circuits are isolated for safety and reliability.
Set value limit function prevents unexpected operation of output devices OMRON Solid-state Power OFF-delay Timer.
caused by setting mistakes.
Output counter function helps in managing the service life of the Timer or,
the load.
Other Features.
Models with instantaneous contact output.
Waterproof, dust-proof structure (UL508 Type 4X and IP66).
Key protection. Input type: high speed response type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External power supply DC12V80mA.
Output type: transistor; - NPN open collector (HH, H, PASS, L, LL).
96 (W) * 48 (H * 95mm) depth.
Power supply voltagee: AC/DC24V H3BH-N8.
High speed, high precision measurement, determine the color display,
Can switch the green / Red 2 kinds of display colors.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input ccan be applied to a variety of measurement and identification situations OMRON H3BH-N8.
Series of DeviceNet type.
The depth (panel below) is only short size 95mm.
Output: Contact output (SPDT).
Contact output (SPDT): No communications.
A DIN 48 × 24 Preset Counter.
Compact, Yet Equipped with.
Communication.
Only 48 × 24 × 83 mm (W × H × D),
Switch between 4-digit preset counter and 4-digit timer operation.
While using the preset counter, it is possible to switch the,
display to monitor the totalizing count value (8 digits) OMRON H3BH-N8 H3BH-N8
Built-in prescaling for counter operation.
ON/OFF-duty adjustable flicker mode that can be used to per,
form cyclic control is available for timer operation.
SV can be changed using front panel keys to any of four values,
preset in SV-banks.
Water-proof structure to NEMA4X/IP66.
Conforms to UL, CSA, and IEC safety standards as well as CE Marking OMRON H3BH-N8. Type of input: AC current input.
Output type: linear; current; NPN open collector (HH, H, PASS, L, LL).
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC100 ~ 240V.
96 (W) * 48 (H * 95mm) depth
Some models are not equipped with.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table OMRON H3BH-N8.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations OMRON Solid-state Power OFF-delay Timer.
DeviceNeEasy to Use and Easy to Read.
Basic Features.
Character height of 10 mm for better readability OMRON Solid-state Power OFF-delay Timer.
Operation is simplified by the Up/Down Keys for each digit on 4-digit.
Safety and Reliability.
Power supply circuit and input circuits are isolated for safety and reliability.
Set value limit function prevents unexpected operation of output devices OMRON Solid-state Power OFF-delay Timer.
caused by setting mistakes.
Output counter function helps in managing the service life of the Timer or,
the load.
Other Features.
Models with instantaneous contact output.
Waterproof, dust-proof structure (UL508 Type 4X and IP66).
Key protection. Input type: high speed response type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External power supply DC12V80mA.
Output type: transistor; - NPN open collector (HH, H, PASS, L, LL).
96 (W) * 48 (H * 95mm) depth.
Power supply voltagee: AC/DC24V H3BH-N8.
High speed, high precision measurement, determine the color display,
Can switch the green / Red 2 kinds of display colors.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input ccan be applied to a variety of measurement and identification situations OMRON H3BH-N8.
Series of DeviceNet type.
The depth (panel below) is only short size 95mm.
...More relevant models >>>>