LK Automation Limited
GT15-QC12B For the connection between QCPU and GOT MITSUBISHI GT15-QC12B
Brand:
MITSUBISHI
Name: Bus connection cable for QCPU (Q mode)
Model: GT15-QC12B
Cable length: 1.2m.
For the connection between QCPU and GOT.
For connection between two GOT.
Applicable models: GT16, GT15, GT11, GT27, GT25.
...More relevant models >>>>
Name: Bus connection cable for QCPU (Q mode)
Model: GT15-QC12B
Cable length: 1.2m.
For the connection between QCPU and GOT.
For connection between two GOT.
Applicable models: GT16, GT15, GT11, GT27, GT25.
Application: you can transfer the same image data at a high speed (about two seconds per 64KB data) to multiple F940GOT.
When programming software is used in the case of Designer2 GT,
You can create a file in HEX Intel format.
Using communication software to transfer data to a ROM writer.
Application Series: F940GOT MITSUBISHI GT15-QC12B. For video input (NTCS/PAL) 4 channel / RGB input 1 channel composite input GT15-QC12B
Applicable model: GT15. RS-422 connection (QnA/A/FXCPU direct connection, computer connection, micro computer connection).
No clock function.
Applicable models: A985 (-V) /975/970/960GOT. A series of high performance models that are widely used in network or single machine work environments.
Screen size: 15 inches MITSUBISHI GT15-QC12B.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: XGA (1024 x 768).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB) MITSUBISHI GT15-QC12B.
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system MITSUBISHI Bracket MITSUBISHI Bracket.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so thaat the touch screen system can not be used properly MITSUBISHI Bracket GT15-QC12B. Protective film for 12.1 inch screen.
Scrub, 5.
Applicable model: GT15. Connecting cable for handheld GOT and PLC.
Cable length: 3 meters.
Application: RSS-422 connection and RS-232C connection MITSUBISHI GT15-QC12B. For the QnA/ACPU/ controller CPU (A Series) the bus (2 channel) thin type unit.
Applicable models: GT15, GT16.
When programming software is used in the case of Designer2 GT,
You can create a file in HEX Intel format.
Using communication software to transfer data to a ROM writer.
Application Series: F940GOT MITSUBISHI GT15-QC12B. For video input (NTCS/PAL) 4 channel / RGB input 1 channel composite input GT15-QC12B
Applicable model: GT15. RS-422 connection (QnA/A/FXCPU direct connection, computer connection, micro computer connection).
No clock function.
Applicable models: A985 (-V) /975/970/960GOT. A series of high performance models that are widely used in network or single machine work environments.
Screen size: 15 inches MITSUBISHI GT15-QC12B.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: XGA (1024 x 768).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB) MITSUBISHI GT15-QC12B.
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system MITSUBISHI Bracket MITSUBISHI Bracket.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so thaat the touch screen system can not be used properly MITSUBISHI Bracket GT15-QC12B. Protective film for 12.1 inch screen.
Scrub, 5.
Applicable model: GT15. Connecting cable for handheld GOT and PLC.
Cable length: 3 meters.
Application: RSS-422 connection and RS-232C connection MITSUBISHI GT15-QC12B. For the QnA/ACPU/ controller CPU (A Series) the bus (2 channel) thin type unit.
Applicable models: GT15, GT16.
...More relevant models >>>>
Related download