Cable for connecting GP3000 to various modulesStandard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 10 meters. GP4000 series back mounted model of waterproof rubber gasket. (1)Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (3 meters) Proface GP3000H-WMA-01. The main controller is connected to the man-machine interface of the host, for MPI communicationUSB interface products: without the base of the tower lights, 3 sections, can be changed color and flashing display, the configuration of the buzzer GP3000H-WMA-01When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function Proface GP3000H-WMA-01. (1)COM2 adapter for converting the COM2 interface to the RS-422 terminal blockTouch screen anti ultraviolet protective film (1 pieces).Expansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)I/O module, including 32 point NPN/PNP inputFor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters Proface GP3000H-WMA-01. A connector that connects the DIO interface for connecting an external I/O device (5 sets).10.4 inch screen protective cover (1 pieces)7.5 inches /3.8 inches /5.7 inches, used to connect the power cord (5 / sets) Proface Wall hanging bracket. Video-Mix module (32000 color, video input x 4 channel, analog RGB input x 1 channel, analog RGB output x 1 channel, VGA/SVGA)Slave station module for connecting support for CANopen10 Proface Wall hanging bracket. 4 inches (TFT), the replacement of the host backlight (1).Some types of PLC are not connected. Length: 5 meters.10.4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function.GLC2300 is not availableDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface Proface Wall hanging bracket. Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) GP3000H-WMA-01. For the direct connection of the MITSUBISHI A series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.Use external output for the GP3000 series of auxiliary connectors (5 / sets).15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1) Proface GP3000H-WMA-01. Note: joints A and B are different, the joints C and D different.