When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)Fitting on NETWORK FLEX interface Proface GP3000H-CBLSD232-10M. Connecting NETWORK FLEX communication cable. (5 / set)Used to connect the 2-Port adapter to GP4000COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master station10 GP3000H-CBLSD232-10M4 inches (TFT), the replacement of the host backlight (1).Used in a variety of host and man-machine interface for RS-232C connection12 Proface GP3000H-CBLSD232-10M. 1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).Touch screen anti ultraviolet protective film (1 pieces).With the installation of screws (4 / sets), for the GP4000 series bacck mounted to the fixed panel models Proface GP3000H-CBLSD232-10M D-Sub joint). (2 / set)Memory for extending EX GP-Pro alarm and character table functions.Converting SIO to RS-422 terminal block10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories Proface GP3000H soft belt joint type straight cable (RS-232C. Clock battery, save system date and time when power is off.15 inches, replaced by a host of backlight (1).Connector for connecting DC power cord. (linear, 5 / set)Touch panel operation for RGB input modules (Master - from: Mini-B)Touch screen anti ultraviolet protective film (1 pieces) Proface GP3000H soft belt joint type straight cable (RS-232C. The main controller is connected to the man-machine interface for MPI communicationLT seal on the control panel.Interface module for the simultaneous use of A/QnA/FX series external controllerThe main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module Proface GP3000H soft belt joinnt type straight cable (RS-232C GP3000H-CBLSD232-10M. With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).The man-machine innterface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port D-Sub joint). NETWORK FLEX 64 point DIO connector terminal block, (including 2)