Connector for connecting DC power cord (5 / set).3.5 inch screen protective cover (1 pieces)Connector for connecting a serial port (1)Durable cable for connecting GP3000H adapter and GP3000H.Connect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM215 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1) Proface GP3000H-CBLSD-10M GP3000H-CBLSD-10M Note: joints A and B are different, the joints C and D different.Touch screen anti ultraviolet protective film (1 pieces).Cable for connecting GP3000 to various modulesExtension cable for connecting USB (Type-A) interface to front panel.One end is a loose wire, which is used to carry out RS-485 connection between the host and LT Proface GP3000H-CBLSD-10M. Stop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces).Portable GP2000H series models accessories, RS-232 single head cable (10 m).Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 5 meters Proface GP3000H-CBLSD-10M. LT4000M (module type DIO), PNP output, DC24V (host).Adapter for EX module (5 / set)Used to connect to an external device (Type-A RS-422/RS-485 interface) to an external device (USB interface).For connecting GP operation data with RS-422 and power /DIO terminals.A veneer, for the GP4000 series back loading models of full flush (white, 1)When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function Proface GP3000H soft belt joint type straight cable Proface GP3000H soft belt joint type straight cable. (1)Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable. (5 / set)GP4000 series back mounted model of waterproof rubber gasket. (1)12.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function Proface GP3000H soft belt joint type straight cable. Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point NPN transistor output12.1 innches, replace the backlight (1 / set)256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card GP3000H-CBLSD-10M. Used to connect the SIEMENS S5 PLC serries to the host computer interfaceWhen the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function Proface GP3000H-CBLSD-10M. (1)