Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable. (5 / set)When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)12.1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) Proface GP3000H-CBLS-10M. Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine GP3000H-CBLS-10MApplicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).LT fasteners installed on the control panel (4 / set)7.4 inches or larger, for external reset input, NETWORK FLEX communication, audio output. AUX connector, L type4.3 Inch Touch Screen anti UV protective film (1 pieces) Proface GP3000H-CBLS-10M. COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interfaceBackup battery for time and data backup (1).Touch screen anti ultraviolet protective film (1 pieces).10.4 inches and above, used to connect the power cord (5 / set).LT4000M (module type analog), NPN output, DC24V (host).Suitable for A/B+ Type modelsUsed to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block Proface GP3000H-CBLS-10M. 10.4 inches or more, for the film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)5.7 inches, installed to provide the function of dust and moistureExtended cable for connecting USB (Type-A) (LT) interface Proface GP3000H no joint soft cable connection. Replaceable anti fouling film for protecting screen protective film (5 sheets / cover) Proface GP3000H no joint soft cable connection. B/B+/C FLEX NETWORK Type connector (5)NETWORK FLEX 64 point DIO connector terminal block, (including 2)LT4000M (module type DIO), PNP output, DC24V (host).The MITSUBISHI Q series PLC is connected to GP, length: 5 m.To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)10 Proface GP3000H no joint soft cable connection GP3000H-CBLS-10M. 4 inches (STN), the replacement of the host backlight (2 / set).Adapter for EX module (5 / set)Slave station module for connecting support for CANopenTouch screen anti ultraviolet protective film (1 pieces).The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail Proface GP3000H-CBLS-10M.