GP-230/250/270 series is replaced by ST series, the gap filled with the opening of the panel12.1 inches, replaced by a host of backlight (1).With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)LT4000M (module type analog), PNP output, DC24V (host) Proface GP3000-EXDM01. Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) GP3000-EXDM01Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.Connector for connecting DC power cord. (right angle, 5 / set)Expansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)The installation of accessories, adjust the size of the GP-411xT panel with the same size of the GP-410xG/W, easy to replace Proface GP3000-EXDM01. Extension cable for connecting USB (Mini-B) interface to front panel.A veneer, for the GP4000 series back loading models of full flush (white, 1)Connect to PC, transfer screen data and user programs Proface GP3000-EXDM01. COM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters Proface Function extended memory. Connect to PC, transfer screen data and user programs.Used to prevent accidental operation. Includes 3 mounting screws.Connect to USB printer (Type-B) Proface Function extended memory. When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces).5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).Used for surface protection of man-machine interface from oil and chemical pollution (5 / set) Proface Function extended memory. Standard cable for connecting GP3000H adapter and GP3000H.
Length: 5 meters GP3000-EXDM01. Suitable for A/B+ Type modelsUsed to install the GP3000H series to a commercially available support arm or panel.Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet mastter stationStandard interface cable for connecting GP and external devices (such as the main controller), with a universal filter Proface GP3000-EXDM01.
Length of 10 meters.