Suitable for LT4000M/GP4000M series modules, 5.7 inch. COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface.Length: 5 meters.The main controller is connected to the man-machine interface for MPI communicationWhen the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces) Proface GP2000-CBLA/5M-01 GP2000-CBLA/5M-01 Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 10 meters. COM1 interface with the cable for direct connection to the CPU series PLC QFor thin film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)10 Proface GP2000-CBLA/5M-01. 4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail.Used for surface protection of man-machine interface from oil and chemical pollution (5 / set) Proface GP2000-CBLA/5M-01. I/O module, including 32 point NPN/PNP inputSome types of PLC are not connected. Length: 5 meters.Extension cable for connecting USB (Mini-B) interface to front panel.Provide dust proof and moisture proof function when installing GP3000H conversion adapter to hard panel Proface MITSUBISHI A series PLC cable. Used to convert the USB interface to the serial interface (RS-232C) Proface MITSUBISHI A series PLC cable. A modem or bar code reader that can be connected to support RS-232C.For the DVI input to GP300012.1 inches, replaced by a host of backlight (1).Used to prevent disconnection. (1 interface, 5 / set)To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)The PC adapter for PCMCIA slot read CF card required Proface MITSUBISHI A series PLLC cable GP2000-CBLA/5M-01. One end is a loose wire, which is used to carry out RS-485 connection between the host and LT.Engineering documents created by the LT interface to download images and logic programming software through the USB intterface Proface GP2000-CBLA/5M-01. Colorful LED switch with USB interface.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface