GP2500S useCOM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)3.4 Inch Touch Screen anti UV protective film (1 pieces).Touch screen anti ultraviolet protective film (1 pieces).Expansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)Clock battery, save system date and time when power is off Proface GP077-CFFM10 GP077-CFFM10 GP-230/250/270 series is replaced by ST series, the gap filled with the opening of the panelDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.LT4000M (module type DIO), PNP output, DC24V (host) Proface GP077-CFFM10. COM2 adapter for converting the COM2 interface to the RS-422 terminal blockSD memory card (4GB, MLC, CLASS4).Used to install the human machine interface to the fixed panel (2 / cover).10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master stationA veneer, for the GP4000 series back loading models of full flush (white, 1)COM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)Used to connect to an external device (Type-A RS-422/RS-485 interface) to an external device (USB interface) Proface GP077-CFFM10 Proface External CF card adapter. Input / output hybrid I/O modules, including 32 point NPN/PNP input and 32 point NPN transistor outputColorful LED switch with USB interface Proface External CF card adapter. The three color tower lamp installed on the fixed panel is connected with the human machine interface through the USB interface.Connector for connecting DC power cord (5)One end is a loose wire, which is used to carry out RS-485 connection between the host and LT Proface External CF cardd adapter GP077-CFFM10. Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors.
Length: 10 meters. Disposable battery (1 blocks) for backing up clock data.GP4000 series back mounted model of waterprroof rubber gasket Proface GP077-CFFM10. (1)LT seal on the control panel.COM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connection