7 inch widescreen display module installed on the senior panel adapter GP-2400, GP-3400 and GP-4400 series of holes.For the DVI input to GP3000When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable Proface GLC2300-FNCN01. (5 / set)1-0 DVI standard (DVI-D 24 pin convex connector)Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceSupport CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output GLC2300-FNCN01 Up to 7 EX modules can be connected.Touch screen anti ultraviolet protective film (1 pieces) Proface GLC2300-FNCN01. 7.4 inches or larger, for external reset input, NETWORK FLEX communication, audio output. AUX connector, L typeLength: 5 meters.12 way 4 digital signals into analog signals and output resultsWith the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1) Proface GLC2300-FNCN01. Note: joints A and B are different, the joints C and D different.256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.OMRON SYSMAC series PLC or other main controller) connected to GP, length: 5 m Proface Screw fixing terminal block. When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces) Proface Screw fixing terminal block. Standard cable for connecting GP3000H adapter and GP3000H.
Length: 10 meters. 10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters) Proface Screw fixing terminal block. 10.4 inches or more, for the film surface protection of man-machine interfaace from fingerprints, water droplets, dust and oil pollution (5 / set)For the operation screen (5 pieces) (GP3000H standard) GLC2300-FNCN01. 10.4 inches (TFT), replace the backlight (2 / set)10.4 inches and above, used to connect the power ccord (5 / set) Proface GLC2300-FNCN01. The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication.