LT4000M (module type DIO), PNP output, DC24V (host).COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface.The guide rail mounting adapter is suitable for the host module (PFXLM4B01DAC, PFXLM4B01DAK, PFXLM4B01DDC, PFXLM4B01DDK) without operating the display Proface GLC-AIOCN01. 10.4 inch screen protective cover (1 pieces)Use external output for the GP3000 series of auxiliary connectors (5 / sets) GLC-AIOCN01GP3000H portable slingUsed for surface protection of man-machine interface from oil and chemical pollution (5 / set).GP2500S useThe host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication Proface GLC-AIOCN01. Used to prevent disconnection. (1 interface, 5 / set)To prevent the connection of disconnected USB cable fastening clips (Mini-B USB, 1 interface, 5 / set)When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)Used to connect the SIEMENS S5 PLC series to the host computer interfaceUsed to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block Proface GLC-AIOCN01. Used to install the man-machine interface to the fixed panel. (4 / set)When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function Proface Type H analog connection head. (1)For 5.7 inch models, for fixing the hooks of the three EX modules.Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master stationUsed to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors Proface Type H analog connection head.
Length: 3 meters. Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface Proface Type H analog connection head. Mounting screws (4 sets) to be fitted to the hard panel at the interfacee of the machine GLC-AIOCN01. Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).A1/A2/B+ DIO Type connector (compression type) (5 / set)Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor outputConverrting 2 analog signals into digital signalsWhen the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)