Insulation method: Phototriac.
Operation Display: Yes(green).
Output(SSR): AC.
Zero cross Function: Yes.
Rated output Load: 2 A(at 100 to 240 VAC).
Rated input voltage (socket): 48 VAC/VDC, 100 VAC, 110 VAC, 200 VAC, 230 VAC.
Applicable model: G3RV-SR700/500-A AC/DC48V,G3RV-SR700/500-A AC100V,
G3RV-SR700/500-A AC110V, G3RV-SR700/500-A AC200V, G3RV-SR700/500-A AC230V OMRON G3RV-SR700-A AC100 G3RV-SR700-A AC100
Global standard size,
low profile slim I/O relay with width 6.2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals OMRON G3RV-SR700-A AC100.
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals.).
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires.
Screw terminal is also stocked to meet the screw type needs.
Mounted relay or solid-state relay has a plug-in terminal OMRON G3RV-SR700-A AC100.
that is difficult to bend at the time of exchange. Type: Conforming to auxiliary power relay specifications.
Contact form: 4PDT.
Cased: Plug-in (octal pins)terminals.
Stable Contact Reliability and Long Life OMRON Slim I/O Relay.
Easy to mount, wire, and use.
A large selection of models including various contact forms,
DC-switching models, and open models OMRON Slim I/O Relay.
Mechanical life: 5,000,000 operations; electrical life,
(under rated load): 500,000 operations.
Models also available with built-in diodes and for use as,
auxiliary power relays. Number of phase: Single-phase.
Control terminal block: Terminal block with small slotted screws.
Type: Constant current OMRON Slim I/O Relay.
Capacity: 45 A, 100 to 240 VAC.
Heater burnout detection: Yes.
Communications: Yes.
High-precision Control with Easy Setup,
Precise heater burnout detection.
Set value and present value monitoring with indicators.
Phase control or optimum cycle control.
RS--485 communications to set manipulated variables and,
monitor load current G3RV-SR700-A AC100.
Total run time monitoring.
Output modes for phase control: proportional to phase angle,
proportional to voltage, proportional to square voltage,,
and constant-current control OMRON G3RV-SR700-A AC100.
Application with various loads: constant load resistance,
variable load resistance.
UL, and IEC/EN (TÜV) certified.