LK Automation Limited LK Automation Limited
Brand: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Go Back >> Product Catalogues
G3PH-5150BL DC5-24 High-power, Load-control SSRs with OMRON G3PH-5150BL DC5-24
Brand: OMRON
Name: High-power Solid State Relays
Model: G3PH-5150BL DC5-24
Insulation method: Photocoupler.
Operation indicator: Yes (yellow).
Zero cross function: No.
Applicable output load: 150 A, 180 to 480 VAC.
Rated input voltage: 5 to 24 VDC.
High-power, Load-control SSRs with.
High Current of 75 or 150 A and High.
Voltage of 240 or 480 VAC.
RoHS compliant.
Models also available with no zero cross.
Replaceable power elements.
Conforms to cULus standards and EN standards (TÜV certification).

Standard certification: No.
Action indicator: there.
Applicable load of output: AC100 3A ~ 240V.
Input rated voltage: DC5V.
Insulation mode: three end two-way photoelectric switch.
Zero trigger function: No.
And the MY type of the same shape of the G3F series of new international standard certification (-VD type) OMRON G3PH-5150BL DC5-24.
Achieved UL, CSA, EN (VDE certification) standard certification G3PH-5150BL DC5-24 (type -VD)
Socket terminal type of same size with MY (2 pole type).
A model with an action indicator to check the status of the input. Action mode alarm contact: lock, B contact.
Category: with fault recovery after the reset confirmation circuit.
Relay number: 3.
Relay circuit unit suitable for centralized alarm device of various control circuits OMRON G3PH-5150BL DC5-24.
MYA combination of multiple MY4 micro power relay, with all kinds of alarm function.
Small, socket type, so it can effectively use the space, repair, maintenance and other operation is simple and convenient.
By use, roughly divided into 4 types, to adapt to the full range of models.
Lloyd standard certified products (MYA-LA12, -LB12). Isolation: Photocoupler OMRON G3PH-5150BL DC5-24.
Zero cross function: Yes.
Indicator: Yes.
Rated output load: 3 A at 100 to 240 VAC (See note 1.).
Rated input voltage: 5 to 24 VDC.
International Standards for G3F Series,
Same Profile as MY Power Relays.
Shape-compatible with mechanical relays OMRON High-power Solid State Relays.
Certified by UL, CSA, and VDE (model numbers with a suffix of“-VD”).
Socket type, same size as MY Power Relays.
Operation indicator provided to confirm input OMRON High-power Solid State Relays.
(model numbers with “N” before the suffix). Type: Microload.
Latching lever (Test switch): No.
Rated input voltage: DC, 48.
Applicable model: G2RV-SR700/500-AP AC/DC48V, G2RV-SR700/500-AP AC100V,
G2RV-SR700/500-AP AC110V, G2RV-SR700/500-AP AC200V, G2RV-SR700/500-AP AC230V OMRON High-power Solid State Relays.
Global standard size, low profile slim.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel.
Realized opening and closing ability with one pole 6 A slim shape.
Micro load products for one pole 50 mA using Au--plated G3PH-5150BL DC5-24.
contacts for small load switching also available.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed locatiion) OMRON G3PH-5150BL DC5-24.
Screw terminal is also stocked to meet the screw type needs.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging.


...More relevant models >>>>
Last one: G3PH-5075BL DC5-24
next one: G3J-T-C Series