LK Automation Limited
G2A-4341P-US OMRON G2A-4341P-US Non pollution relay
Brand:
OMRON
Name: Non pollution relay
Model: G2A-4341P-US
The main body: terminal type of printed circuit board.
Pole number: 4 pole.
G2A type plastic sealing type.
Because it is sealed structure, so even in the dust environment, etc..
Can also play a more stable performance than the lock type.
Parts of the relay mechanism are annealed,
Reduce the generation of internal gas.
Compared with the metal sealed relay, the price is cheaper
...More relevant models >>>>
Name: Non pollution relay
Model: G2A-4341P-US
The main body: terminal type of printed circuit board.
Pole number: 4 pole.
G2A type plastic sealing type.
Because it is sealed structure, so even in the dust environment, etc..
Can also play a more stable performance than the lock type.
Parts of the relay mechanism are annealed,
Reduce the generation of internal gas.
Compared with the metal sealed relay, the price is cheaper
Standard certification: No.
Action indicator: there.
Applicable load of output: AC100 3A ~ 240V.
Input rated voltage: DC5 ~ 24V.
Insulation: photo coupler.
Zero crossing trigger function.
And the MY type of the same shape of the G3F series of new international standard certification (-VD type) OMRON G2A-4341P-US.
Achieved UL, CSA, EN (VDE certification) standard certification. (type -VD)
Socket terminal type of same size with MY (2 pole type) G2A-4341P-US
A model with an action indicator to check the status of the input. Number of phase: Single-phase.
Control terminal block: Terminal block with small slotted screws.
Type: Constant current.
Capacity: 60 A, 100 to 240 VAC.
Heater burnout detection: Yes.
Communications: Yes OMRON G2A-4341P-US.
High-precision Control with Easy Setup,
Precise heater burnout detection.
Set value and present value monitoring with indicators.
Phase control or optimum cycle control.
RS-485 communications to set manipulated variables and,
monitor load current.
Total run time monitoring.
Output modes for phase control: proportional to phase angle,
proportional to voltage, proportional to square voltage,
and constant-current control OMRON G2A-4341P-US.
Application with various loads: constant load resistance,
variable load resistance.
UL, and IEC/EN (TÜV) certified. Terminal (wire connection): Push-In Plus Terminal.
Applicable output load: AC load OMRON Non pollution relay.
Zero cross function: Yes.
Rated input voltage: DC 24V.
Global standard size,
low profile slim I/O relay with width 6.2 mm,
slim I/O solid state relay OMRON Non pollution relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals.
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals OMRON Non pollution relay. ). G2A-4341P-US.
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires.
Screw terminal is also stocked to meet the screw type needs OMRON G2A-4341P-US.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange.
Action indicator: there.
Applicable load of output: AC100 3A ~ 240V.
Input rated voltage: DC5 ~ 24V.
Insulation: photo coupler.
Zero crossing trigger function.
And the MY type of the same shape of the G3F series of new international standard certification (-VD type) OMRON G2A-4341P-US.
Achieved UL, CSA, EN (VDE certification) standard certification. (type -VD)
Socket terminal type of same size with MY (2 pole type) G2A-4341P-US
A model with an action indicator to check the status of the input. Number of phase: Single-phase.
Control terminal block: Terminal block with small slotted screws.
Type: Constant current.
Capacity: 60 A, 100 to 240 VAC.
Heater burnout detection: Yes.
Communications: Yes OMRON G2A-4341P-US.
High-precision Control with Easy Setup,
Precise heater burnout detection.
Set value and present value monitoring with indicators.
Phase control or optimum cycle control.
RS-485 communications to set manipulated variables and,
monitor load current.
Total run time monitoring.
Output modes for phase control: proportional to phase angle,
proportional to voltage, proportional to square voltage,
and constant-current control OMRON G2A-4341P-US.
Application with various loads: constant load resistance,
variable load resistance.
UL, and IEC/EN (TÜV) certified. Terminal (wire connection): Push-In Plus Terminal.
Applicable output load: AC load OMRON Non pollution relay.
Zero cross function: Yes.
Rated input voltage: DC 24V.
Global standard size,
low profile slim I/O relay with width 6.2 mm,
slim I/O solid state relay OMRON Non pollution relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals.
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals OMRON Non pollution relay. ). G2A-4341P-US.
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires.
Screw terminal is also stocked to meet the screw type needs OMRON G2A-4341P-US.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange.
...More relevant models >>>>