LK Automation Limited
FX1S-30MT-DSS MITSUBISHI FX1S-30MT-DSS Power supply voltage: 24VDC
Brand:
MITSUBISHI
Name: PLC
Model: FX1S-30MT-DSS
The largest input / output points: 30 points.
Power supply voltage: 24VDC.
Input points: 16 points.
Output points: 14 points.
Output type: Transistor (source).
Power consumption (W): 8.
Weight (kg):0.35.
Size (WxHxD) mm:100x90x49.
All equipment is digital input and output point.
The total I/O points are not more than 30 points, and the input points are less than 16, the output points are less than 14.
Its MT series of PLC can drive 2 way servo or stepper, commonly used in the control system for a simple manipulator.
MITSUBISHI FX1S series PLC is suitable for the smallest package,
It is the preferred target for low cost users to seek powerful control over a limited range of I/0.
FX1S provides up to 30 I/O points, and can be transmitted through serial communication data,
MT models also have the ability to locate, widely used in a variety of small mechanical equipment.
...More relevant models >>>>
Name: PLC
Model: FX1S-30MT-DSS
The largest input / output points: 30 points.
Power supply voltage: 24VDC.
Input points: 16 points.
Output points: 14 points.
Output type: Transistor (source).
Power consumption (W): 8.
Weight (kg):0.35.
Size (WxHxD) mm:100x90x49.
All equipment is digital input and output point.
The total I/O points are not more than 30 points, and the input points are less than 16, the output points are less than 14.
Its MT series of PLC can drive 2 way servo or stepper, commonly used in the control system for a simple manipulator.
MITSUBISHI FX1S series PLC is suitable for the smallest package,
It is the preferred target for low cost users to seek powerful control over a limited range of I/0.
FX1S provides up to 30 I/O points, and can be transmitted through serial communication data,
MT models also have the ability to locate, widely used in a variety of small mechanical equipment.
Input and output points: 32 points.
Power supply: DC24V.
Input points: 16 points.
Input specifications: drain / source.
Output points: 16 points.
Output form: transistor output (source).
Power consumption: 8W.
Weight: 0.2KG.
Outline dimension: 34x90x87mm.
Ultra compact model.
Basic unit: 32.
FX3GC is a connector type of compact PLC,
In the same performance with the FX3GA/FX3G can also save space, the provincial connection MITSUBISHI FX1S-30MT-DSS FX1S-30MT-DSS
Compact third generation standard model.
Connector type provincial space and provincial connection.
Suitable for small scale control of high cost.
Control points to 128 points, the use of CC-Link remote I/O can control the maximum 256 points.
N product details
Built in CPU, power supply, input and output MITSUBISHI FX1S-30MT-DSS.
Connector type input and output, the FX3 series of functions to compact body internal condensation. LINK MELSEC-I/O master module.
DC5V consumption current: 200mA.
High speed counter equipped with 6 to 8 channels.
FX series of all models are standard with a high-speed counter.
Through a simple procedure to achieve high speed control.
Through the CC-Link and a variety of machine communications, the province of wiring MITSUBISHI FX1S-30MT-DSS.
Using CC-Link to control a variety of FA machines.
FX3G (*) /FX3U (C) series can be expanded by CC-Link control points.
Data communication with various machines using Ethernet MITSUBISHI PLC.
FX3 series through Ethernet expansion device,
The monitoring and maintenance of equipment can be easily carried out in a place far from the scene MITSUBISHI PLC.
Various machine communication with MODBUS protocol
Special adapter for MODBUS communications,
FX3 series can be used as a master or slave station with a variety of MODBUS protocol machine communication. Function: CPU module (internal service power supply).
Input and output points: 80 points MITSUBISHI PLC.
Power supply capacity (DC5V power): 1100mA.
Power supply capacity (DC24V service power supply): 600mA.
Input / output mode: DC input (drain / source) / transistor (source).
Input points: 40 points.
Output points: 40 points.
The new exxpansion module is more convenient!
Pioneer products with advanced built-in functions and rich extensibility FX1S-30MT-DSS.
FX5U built-in analog, communication, high speed input and output,
By extending the board and adapter can be easilyy extended system MITSUBISHI FX1S-30MT-DSS.
In addition, through the high speed system bus,
Can maximize the role of the built-in intelligent functions of the expansion device.
Power supply: DC24V.
Input points: 16 points.
Input specifications: drain / source.
Output points: 16 points.
Output form: transistor output (source).
Power consumption: 8W.
Weight: 0.2KG.
Outline dimension: 34x90x87mm.
Ultra compact model.
Basic unit: 32.
FX3GC is a connector type of compact PLC,
In the same performance with the FX3GA/FX3G can also save space, the provincial connection MITSUBISHI FX1S-30MT-DSS FX1S-30MT-DSS
Compact third generation standard model.
Connector type provincial space and provincial connection.
Suitable for small scale control of high cost.
Control points to 128 points, the use of CC-Link remote I/O can control the maximum 256 points.
N product details
Built in CPU, power supply, input and output MITSUBISHI FX1S-30MT-DSS.
Connector type input and output, the FX3 series of functions to compact body internal condensation. LINK MELSEC-I/O master module.
DC5V consumption current: 200mA.
High speed counter equipped with 6 to 8 channels.
FX series of all models are standard with a high-speed counter.
Through a simple procedure to achieve high speed control.
Through the CC-Link and a variety of machine communications, the province of wiring MITSUBISHI FX1S-30MT-DSS.
Using CC-Link to control a variety of FA machines.
FX3G (*) /FX3U (C) series can be expanded by CC-Link control points.
Data communication with various machines using Ethernet MITSUBISHI PLC.
FX3 series through Ethernet expansion device,
The monitoring and maintenance of equipment can be easily carried out in a place far from the scene MITSUBISHI PLC.
Various machine communication with MODBUS protocol
Special adapter for MODBUS communications,
FX3 series can be used as a master or slave station with a variety of MODBUS protocol machine communication. Function: CPU module (internal service power supply).
Input and output points: 80 points MITSUBISHI PLC.
Power supply capacity (DC5V power): 1100mA.
Power supply capacity (DC24V service power supply): 600mA.
Input / output mode: DC input (drain / source) / transistor (source).
Input points: 40 points.
Output points: 40 points.
The new exxpansion module is more convenient!
Pioneer products with advanced built-in functions and rich extensibility FX1S-30MT-DSS.
FX5U built-in analog, communication, high speed input and output,
By extending the board and adapter can be easilyy extended system MITSUBISHI FX1S-30MT-DSS.
In addition, through the high speed system bus,
Can maximize the role of the built-in intelligent functions of the expansion device.
...More relevant models >>>>