LK Automation Limited
FX1N-2AD-BD Can be mixed with the use of voltage input and current input MITSUBISHI FX1N-2AD-BD
Brand:
MITSUBISHI
Name: Analog input expansion board
Model: FX1N-2AD-BD
Analog input expansion board (2 channel).
Can be installed in FX1N, PLC FX1S, providing 2 channel analog input of the board.
Because it is embedded in the PLC installation, so do not need to install space.
Can be mixed with the use of voltage input and current input.
...More relevant models >>>>
Name: Analog input expansion board
Model: FX1N-2AD-BD
Analog input expansion board (2 channel).
Can be installed in FX1N, PLC FX1S, providing 2 channel analog input of the board.
Because it is embedded in the PLC installation, so do not need to install space.
Can be mixed with the use of voltage input and current input.
Input points: 32 points.
Power supply: the basic unit to the expansion module to provide power.
Terminal type: connector type.
Weight: 0.2kg.
FX3GC, FX3UC can be directly connected to the input and output expansion equipment, to achieve a compact expansion.
Can choose 16 points, 32 points of the relay or transistor input and output models MITSUBISHI FX1N-2AD-BD.
FX2NC-16E_-T-DS for terminal units can be disassembled models FX1N-2AD-BD Specifications: FX0N-65EC.
Cable extending unit.
Length 65CM. Max input / output points: 10 points.
Supply voltage: 100 - 240VAC.
Input points: 6 points.
Output points: 4 points.
Output type: relay.
Power consumption (W): 19.
Weight (kg):0.22.
Size (WxHxD) mm:60x90x49.
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types MITSUBISHI FX1N-2AD-BD.
This type of PLC is mainly used in all of the digital input, digital output control point of the device.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor MITSUBISHI FX1N-2AD-BD.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O.
The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication. Input signal power: 40mA MITSUBISHI Analog input expansion board. DC24V
Axis of control: 1.
Output frequency: Max 200kHz.
Weight: 0.2kg.
FX3U-1PG is a pulse output module of the maximum output 200kHz pulse train MITSUBISHI Analog input expansion board.
7 operation modes needed to take the simple position control.
The speed and the target address can be changed in the positioning operation according to the operation of the project,
Support near S shape plus deceleration. High speed positioning can be carried out smoothly MITSUBISHI Analog input expansion board.
Up to 8 units can be connected to FX3U or FX3UC.
Connecting FX3UC requires FX2NNC-CNV-IF or FX3UC-IPS-5V FX1N-2AD-BD. Input points: 16 points.
Output points: 16 points.
Output form: transistor.
Connected programmable logic controller: FX1NC, FX2NC, FX3UC.
FX2NC expansion module can be directly connected to the FX1NCC, FX2NC, PLC FX3UC on the expansion of the input and output MITSUBISHI FX1N-2AD-BD.
Do not need to connect the cable and so on, therefore can carry on the compact expansion.
Power supply: the basic unit to the expansion module to provide power.
Terminal type: connector type.
Weight: 0.2kg.
FX3GC, FX3UC can be directly connected to the input and output expansion equipment, to achieve a compact expansion.
Can choose 16 points, 32 points of the relay or transistor input and output models MITSUBISHI FX1N-2AD-BD.
FX2NC-16E_-T-DS for terminal units can be disassembled models FX1N-2AD-BD Specifications: FX0N-65EC.
Cable extending unit.
Length 65CM. Max input / output points: 10 points.
Supply voltage: 100 - 240VAC.
Input points: 6 points.
Output points: 4 points.
Output type: relay.
Power consumption (W): 19.
Weight (kg):0.22.
Size (WxHxD) mm:60x90x49.
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types MITSUBISHI FX1N-2AD-BD.
This type of PLC is mainly used in all of the digital input, digital output control point of the device.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor MITSUBISHI FX1N-2AD-BD.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O.
The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication. Input signal power: 40mA MITSUBISHI Analog input expansion board. DC24V
Axis of control: 1.
Output frequency: Max 200kHz.
Weight: 0.2kg.
FX3U-1PG is a pulse output module of the maximum output 200kHz pulse train MITSUBISHI Analog input expansion board.
7 operation modes needed to take the simple position control.
The speed and the target address can be changed in the positioning operation according to the operation of the project,
Support near S shape plus deceleration. High speed positioning can be carried out smoothly MITSUBISHI Analog input expansion board.
Up to 8 units can be connected to FX3U or FX3UC.
Connecting FX3UC requires FX2NNC-CNV-IF or FX3UC-IPS-5V FX1N-2AD-BD. Input points: 16 points.
Output points: 16 points.
Output form: transistor.
Connected programmable logic controller: FX1NC, FX2NC, FX3UC.
FX2NC expansion module can be directly connected to the FX1NCC, FX2NC, PLC FX3UC on the expansion of the input and output MITSUBISHI FX1N-2AD-BD.
Do not need to connect the cable and so on, therefore can carry on the compact expansion.
...More relevant models >>>>