LK Automation Limited
EE-SPX613 OMRON Pipe-mounting Liquid Level Photomicrosensor with Built-in Amplifier OMRON EE-SPX613
Brand:
OMRON
Name: Pipe-mounting Liquid Level Photomicrosensor with Built-in Amplifier
Model: EE-SPX613
Sensing method: Through-beam type.
Output type: NPN output.
Output configuration: Dark-ON or Light-ON (selectable).
Cable length: 1 m.
Liquid Level Photomicrosensor with,
operation mode and sensitivity selectors,
for easy application.
Operation mode selector allows modes to be switched easily.
Sensitivity selector is suitable for any 6- to 13-mm-diameter transparent or,
semi-transparent pipe with a wall thickness of 1 mm.
Uses a clean (with no powder parting agent) cable.
Operating voltage range: 12 to 24 VDC.
...More relevant models >>>>
Name: Pipe-mounting Liquid Level Photomicrosensor with Built-in Amplifier
Model: EE-SPX613
Sensing method: Through-beam type.
Output type: NPN output.
Output configuration: Dark-ON or Light-ON (selectable).
Cable length: 1 m.
Liquid Level Photomicrosensor with,
operation mode and sensitivity selectors,
for easy application.
Operation mode selector allows modes to be switched easily.
Sensitivity selector is suitable for any 6- to 13-mm-diameter transparent or,
semi-transparent pipe with a wall thickness of 1 mm.
Uses a clean (with no powder parting agent) cable.
Operating voltage range: 12 to 24 VDC.
Appearance: Shielded, 3.5 dia.
Stable sensing area: 0.8 (1.8) mm.
Separate Amplifier Sensor with.
Sensitivity Adjustment.
Compact design with smaller Sensor Head.
Heat-resistance model available for application between.
-10 and 200°C. Type: Standard models.
Connecting method: Pre-wired (2 m).
Model: NPN output OMRON EE-SPX613.
Applicable wire-saving connector(sold separately): Type,--; Model,-- EE-SPX613
Stable Detection with Advanced Fiber.
Amplifier Units.
A wide range of added value with standard models with one,
input and two outputs, and ultra-long-term APC models with an,
APC life of approximately 20 years.
Power turning to easily set the optimum light level.
Automatic Power Control (APC) is always enabled to stabilize,
emitter power with high accuracy OMRON EE-SPX613.
GIGA RAY for stable detection with the highest level of power in,
this class even for low-reflective objects and large objects.
The E3X-DA0-S supports an EtherCAT Sensor Communications,
Unit or CompoNet Sensor Communications Unit. Appearance: Horizontal type.
Sensing method: Convergent reflective type.
Sensing distance: 2 to 5 mm OMRON EE-SPX613.
Output type: NPN output.
Output configuration: Dark-ON.
Accurately detects objects placed in,
front of shiny Background.
A shiny background can be used as long as the distance between,
the sensor and the background is 20 mm or more.
Detects minute objects such as a 0.05-mm-dia. pure copper wire.
Small dispersion in sensing distance.
Light modulation effectively reduces external light interference OMRON Pipe-mounting Liquid Level Photomicrosensor with Built-in Amplifier.
Wide operating voltage range: 5 to 24 VDC OMRON Pipe-mounting Liquid Level Photomicrosensor with Built-in Amplifier. Appearance: T-shaped, slot center 7 mm.
Sensing method: Through beam type (with slot).
Connecting method: Connector model (4 poles).
Sensing distance: 5 mm (slot width).
Operating mode: Dark-ON/Light-ON (2 outputs).
Indicator mode: Incident light.
Model: PNP output.
Built-in connector enables,
downsizing and easier connection OMRON Pipe-mounting Liquid Level Photomicrosensor with Built-in Amplifier.
Protective circuit for safe operation.
A built-in connector minimizes the shape and dimensional,
requirements.
Two outputs: light-ON and ddark-ON EE-SPX613.
Complete lineup including seven different shapes.
Safer operation with built-in power supply reverse polarity,
protection.
Output overcurrent protection with a thermal shutdown,
circuit (patent pending).
The indicator can be seen from many directions to enable,
installation in more locations OMRON EE-SPX613.
Connector with lock that mates with commercially available,
connectors.
Stable sensing area: 0.8 (1.8) mm.
Separate Amplifier Sensor with.
Sensitivity Adjustment.
Compact design with smaller Sensor Head.
Heat-resistance model available for application between.
-10 and 200°C. Type: Standard models.
Connecting method: Pre-wired (2 m).
Model: NPN output OMRON EE-SPX613.
Applicable wire-saving connector(sold separately): Type,--; Model,-- EE-SPX613
Stable Detection with Advanced Fiber.
Amplifier Units.
A wide range of added value with standard models with one,
input and two outputs, and ultra-long-term APC models with an,
APC life of approximately 20 years.
Power turning to easily set the optimum light level.
Automatic Power Control (APC) is always enabled to stabilize,
emitter power with high accuracy OMRON EE-SPX613.
GIGA RAY for stable detection with the highest level of power in,
this class even for low-reflective objects and large objects.
The E3X-DA0-S supports an EtherCAT Sensor Communications,
Unit or CompoNet Sensor Communications Unit. Appearance: Horizontal type.
Sensing method: Convergent reflective type.
Sensing distance: 2 to 5 mm OMRON EE-SPX613.
Output type: NPN output.
Output configuration: Dark-ON.
Accurately detects objects placed in,
front of shiny Background.
A shiny background can be used as long as the distance between,
the sensor and the background is 20 mm or more.
Detects minute objects such as a 0.05-mm-dia. pure copper wire.
Small dispersion in sensing distance.
Light modulation effectively reduces external light interference OMRON Pipe-mounting Liquid Level Photomicrosensor with Built-in Amplifier.
Wide operating voltage range: 5 to 24 VDC OMRON Pipe-mounting Liquid Level Photomicrosensor with Built-in Amplifier. Appearance: T-shaped, slot center 7 mm.
Sensing method: Through beam type (with slot).
Connecting method: Connector model (4 poles).
Sensing distance: 5 mm (slot width).
Operating mode: Dark-ON/Light-ON (2 outputs).
Indicator mode: Incident light.
Model: PNP output.
Built-in connector enables,
downsizing and easier connection OMRON Pipe-mounting Liquid Level Photomicrosensor with Built-in Amplifier.
Protective circuit for safe operation.
A built-in connector minimizes the shape and dimensional,
requirements.
Two outputs: light-ON and ddark-ON EE-SPX613.
Complete lineup including seven different shapes.
Safer operation with built-in power supply reverse polarity,
protection.
Output overcurrent protection with a thermal shutdown,
circuit (patent pending).
The indicator can be seen from many directions to enable,
installation in more locations OMRON EE-SPX613.
Connector with lock that mates with commercially available,
connectors.
...More relevant models >>>>