LK Automation Limited
E6C3-AG5C-C OMRON E6C3-AG5C-C Slim Encoder with Diameter of 50 mm
Brand:
OMRON
Name: Slim Encoder with Diameter of 50 mm
Model: E6C3-AG5C-C
Power supply voltage: 12 to 24 VDC.
Output configuration: Open-collector output (NPN).
Output code: Gray.
Resolution (divisions): 256, 360, (720) *2).
Connection method: Pre-wired Connector Model (1 m).
Rugged Rotary Encoder.
Absolute model.
External diameter of 50 mm.
Resolution of up to 1,024 (10-bit).
IP65 (improved oil-proof protection with sealed bearings).
Optimum angle control possible in combination with PLC or,
Cam Positioner.
...More relevant models >>>>
Name: Slim Encoder with Diameter of 50 mm
Model: E6C3-AG5C-C
Power supply voltage: 12 to 24 VDC.
Output configuration: Open-collector output (NPN).
Output code: Gray.
Resolution (divisions): 256, 360, (720) *2).
Connection method: Pre-wired Connector Model (1 m).
Rugged Rotary Encoder.
Absolute model.
External diameter of 50 mm.
Resolution of up to 1,024 (10-bit).
IP65 (improved oil-proof protection with sealed bearings).
Optimum angle control possible in combination with PLC or,
Cam Positioner.
Appearance: T-shaped, slot center 7 mm.
Sensing method: Through beam type (with slot).
Connecting method: Connector model (4 poles).
Sensing distance: 5 mm (slot width).
Operating mode: Dark-ON/Light-ON (2 outputs).
Indicator mode: Incident light.
Model: PNP output.
Built-in connector enables,
downsizing and easier connection OMRON E6C3-AG5C-C.
Protective circuit for safe operation.
A built-in connector minimizes the shape and dimensional,
requirements E6C3-AG5C-C
Two outputs: light-ON and dark-ON.
Complete lineup including seven different shapes.
Safer operation with built-in power supply reverse polarity,
protection.
Output overcurrent protection with a thermal shutdown,
circuit (patent pending).
The indicator can be seen from many directions to enable,
installation in more locations OMRON E6C3-AG5C-C.
Connector with lock that mates with commercially available,
connectors. Sensor type: Diffuse-reflective.
Sensing distance: 100 mm.
Connection method: M12 connector.
Model: PNP output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered OMRON E6C3-AG5C-C.
A wide variety of models.
Models designed for special applications.
Non-stop detection.
High quality and reliability.
High EMC protection.
High light immunity.
Robust and waterproof housing. Appearance: M12.
Sensing distance: 8 mm.
Connection method: M12 Connector Models OMRON Slim Encoder with Diameter of 50 mm.
Cable specifications: --.
Polarity: Yes.
Operation mode : NO.
Pin arrangement: 1: +V, 4: 0 V OMRON Slim Encoder with Diameter of 50 mm.
Applicable connector code: A.
Your Search for Proximity Sensors.
Starts with the World-leading.
Performance and Quality of the E2E.
Standard Sensors for detecting ferrous metals.
Wide array of variations. Ideal for a variety of applications.
Models with different frequencies are also available to prevent,
mutual interference OMRON Slim Encoder with Diameter of 50 mm.
Superior environment resistance with standard cable made of oil,
resistant PVC and sensing surface made of material that resists,
cutting oil.
Useful to help prevent disconnection.
Cable protector provided as a standard feature. Size: M30, Non-shielded.
Sensing distance: 20.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 44 (58)(See note.).
Output configuratioon: NPN E6C3-AG5C-C.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpiecees are eliminated OMRON E6C3-AG5C-C.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization.
Sensing method: Through beam type (with slot).
Connecting method: Connector model (4 poles).
Sensing distance: 5 mm (slot width).
Operating mode: Dark-ON/Light-ON (2 outputs).
Indicator mode: Incident light.
Model: PNP output.
Built-in connector enables,
downsizing and easier connection OMRON E6C3-AG5C-C.
Protective circuit for safe operation.
A built-in connector minimizes the shape and dimensional,
requirements E6C3-AG5C-C
Two outputs: light-ON and dark-ON.
Complete lineup including seven different shapes.
Safer operation with built-in power supply reverse polarity,
protection.
Output overcurrent protection with a thermal shutdown,
circuit (patent pending).
The indicator can be seen from many directions to enable,
installation in more locations OMRON E6C3-AG5C-C.
Connector with lock that mates with commercially available,
connectors. Sensor type: Diffuse-reflective.
Sensing distance: 100 mm.
Connection method: M12 connector.
Model: PNP output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered OMRON E6C3-AG5C-C.
A wide variety of models.
Models designed for special applications.
Non-stop detection.
High quality and reliability.
High EMC protection.
High light immunity.
Robust and waterproof housing. Appearance: M12.
Sensing distance: 8 mm.
Connection method: M12 Connector Models OMRON Slim Encoder with Diameter of 50 mm.
Cable specifications: --.
Polarity: Yes.
Operation mode : NO.
Pin arrangement: 1: +V, 4: 0 V OMRON Slim Encoder with Diameter of 50 mm.
Applicable connector code: A.
Your Search for Proximity Sensors.
Starts with the World-leading.
Performance and Quality of the E2E.
Standard Sensors for detecting ferrous metals.
Wide array of variations. Ideal for a variety of applications.
Models with different frequencies are also available to prevent,
mutual interference OMRON Slim Encoder with Diameter of 50 mm.
Superior environment resistance with standard cable made of oil,
resistant PVC and sensing surface made of material that resists,
cutting oil.
Useful to help prevent disconnection.
Cable protector provided as a standard feature. Size: M30, Non-shielded.
Sensing distance: 20.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 44 (58)(See note.).
Output configuratioon: NPN E6C3-AG5C-C.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpiecees are eliminated OMRON E6C3-AG5C-C.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization.
...More relevant models >>>>