LK Automation Limited
E3Z-L81 Tiny workpieces as little as 01 mm in diameter can be, OMRON E3Z-L81
Brand:
OMRON
Name: Narrow-beam Photoelectric Sensor
Model: E3Z-L81
Sensing method: Narrow-beam reflective.
Connection method: Pre-wired.
Sensing distance: 90±30 mm.
Model: PNP output.
Small 2.5-mm-diameter Spot Ideal for.
Detecting Small Workpieces.
Tiny workpieces as little as 0.1 mm in diameter can be,
detected with the 2.5-mm-dia. spot.
The narrow beam enables sensing from small slots or holes.
The small spot of light enables visual checking of sensing,
spot position.
IP67 degree of protection, mutual interference prevention,
and EN standard compliance.
...More relevant models >>>>
Name: Narrow-beam Photoelectric Sensor
Model: E3Z-L81
Sensing method: Narrow-beam reflective.
Connection method: Pre-wired.
Sensing distance: 90±30 mm.
Model: PNP output.
Small 2.5-mm-diameter Spot Ideal for.
Detecting Small Workpieces.
Tiny workpieces as little as 0.1 mm in diameter can be,
detected with the 2.5-mm-dia. spot.
The narrow beam enables sensing from small slots or holes.
The small spot of light enables visual checking of sensing,
spot position.
IP67 degree of protection, mutual interference prevention,
and EN standard compliance.
Fitting materials: Stainless steel(SUS304).
Count: 1 .
Accessories: Description, Phillips screw Nut plat;
Material, Stainless steel Stainless steel;
Count, 2, 1.
Applicable sensor (mounting pitch on sensor side): ZX1-LD50, ZX1-LD100 @@.
Page: Dimensions, 16.
Sensor type: Diffuse-reflective OMRON E3Z-L81.
Sensing distance: 100 mm.
Connection method: M12 connector.
Model: PNP output.
A new generation in sensing performance E3Z-L81
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models.
Models designed for special applications.
Non-stop detection.
High quality and reliability.
High EMC protection.
High light immunity OMRON E3Z-L81.
Robust and waterproof housing. Nozzle gap.
Optical system: positive and negative radiation.
Detection distance: 10 positive and negative 0.5mm.
Beam shape: linear beam.
Beam diameter: 900mm * 25 M.
Resolution: 0.25 M.
Cable length: 0.5m. E32-D61-S type: environment resistant; heat resistant,
Specialty: heat resistant: 350,
Bending radius (mm): R25.
Standard test object (minimum test object) (mm) 1: (0 OMRON E3Z-L81. 005),
Fiber element for meeting diversified needsAppearance: Noise-resistant Models, Unshielded 34 dia.
Sensing distance: 20 mm [3 to 20 mm *].
Model: Output configuration, DC 3-wire, NPN;
Operation mode, NC.
Long-distance Capacitive Sensor.
with Adjustable Sensitivity.
CE Marking for DC 3-wire models and AC/DC 2-wire models OMRON Narrow-beam Photoelectric Sensor .
Noise-resistant models are also available for environments with,
strong noise OMRON Narrow-beam Photoelectric Sensor . 1M E32-T54V type: environmental type; vacuum resistance,
Specialty: L word shape heat: 200,
Shape / detection distance (mm): 500; 660; 330 (180),
Bending radius (mm): R30.
Standard test object (minimum test object) (mm) 1: 4 (0.1),
Fiber element for meeting diversified needsSize: M12 (Brass); Single; Shielded OMRON Narrow-beam Photoelectric Sensor .
Sensing distance: 2 mm.
Connecting method (See note 1.): M12 Connector.
Body length: Short.
Output configuration: NPN.
Operation mode NC.
A new generation in global applications. Transmits Input Device ON/OFF.
Signals and Power.
The Key to Effortless Wiring for.
Rotating and Moving Bodies. Independent teaching button:
Only 2 keys, showing the teaching and the sense of adjustment at the same time complete.
After fixing the optical fiber head:
Is detected by the state of the object, each according to a teaching (TEACH) key, you can complete the threshold value. E3Z-L81.
At the same time the maximum sensitivity adjustment, solve the amount of light is too large or too small problem, saving time adjustment.
Super fine adjustment button.
Large size of the fine adjustment button, the threshold adjustmennt is more convenient OMRON E3Z-L81.
Large display + status indicator.
Add action mode indicator (ON/D L ON) and teaching status indicator light,
Status at a glance.
Count: 1 .
Accessories: Description, Phillips screw Nut plat;
Material, Stainless steel Stainless steel;
Count, 2, 1.
Applicable sensor (mounting pitch on sensor side): ZX1-LD50, ZX1-LD100 @@.
Page: Dimensions, 16.
Sensor type: Diffuse-reflective OMRON E3Z-L81.
Sensing distance: 100 mm.
Connection method: M12 connector.
Model: PNP output.
A new generation in sensing performance E3Z-L81
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models.
Models designed for special applications.
Non-stop detection.
High quality and reliability.
High EMC protection.
High light immunity OMRON E3Z-L81.
Robust and waterproof housing. Nozzle gap.
Optical system: positive and negative radiation.
Detection distance: 10 positive and negative 0.5mm.
Beam shape: linear beam.
Beam diameter: 900mm * 25 M.
Resolution: 0.25 M.
Cable length: 0.5m. E32-D61-S type: environment resistant; heat resistant,
Specialty: heat resistant: 350,
Bending radius (mm): R25.
Standard test object (minimum test object) (mm) 1: (0 OMRON E3Z-L81. 005),
Fiber element for meeting diversified needsAppearance: Noise-resistant Models, Unshielded 34 dia.
Sensing distance: 20 mm [3 to 20 mm *].
Model: Output configuration, DC 3-wire, NPN;
Operation mode, NC.
Long-distance Capacitive Sensor.
with Adjustable Sensitivity.
CE Marking for DC 3-wire models and AC/DC 2-wire models OMRON Narrow-beam Photoelectric Sensor .
Noise-resistant models are also available for environments with,
strong noise OMRON Narrow-beam Photoelectric Sensor . 1M E32-T54V type: environmental type; vacuum resistance,
Specialty: L word shape heat: 200,
Shape / detection distance (mm): 500; 660; 330 (180),
Bending radius (mm): R30.
Standard test object (minimum test object) (mm) 1: 4 (0.1),
Fiber element for meeting diversified needsSize: M12 (Brass); Single; Shielded OMRON Narrow-beam Photoelectric Sensor .
Sensing distance: 2 mm.
Connecting method (See note 1.): M12 Connector.
Body length: Short.
Output configuration: NPN.
Operation mode NC.
A new generation in global applications. Transmits Input Device ON/OFF.
Signals and Power.
The Key to Effortless Wiring for.
Rotating and Moving Bodies. Independent teaching button:
Only 2 keys, showing the teaching and the sense of adjustment at the same time complete.
After fixing the optical fiber head:
Is detected by the state of the object, each according to a teaching (TEACH) key, you can complete the threshold value. E3Z-L81.
At the same time the maximum sensitivity adjustment, solve the amount of light is too large or too small problem, saving time adjustment.
Super fine adjustment button.
Large size of the fine adjustment button, the threshold adjustmennt is more convenient OMRON E3Z-L81.
Large display + status indicator.
Add action mode indicator (ON/D L ON) and teaching status indicator light,
Status at a glance.
...More relevant models >>>>
Related download