LK Automation Limited
E3S-VS1C42 OMRON Identification sensor E3S-VS1C42
Brand:
OMRON
Name: Identification sensor
Model: E3S-VS1C42
Choose red, green light source of the 2 models.
Can detect a variety of colors.
Detection mode: diffuse reflection type.
Shape: vertical.
Connection mode: lead wire.
Detection distance: green light 12mm positive and negative 2mm.
Output mode: open collector output type, NPN output.
...More relevant models >>>>
Name: Identification sensor
Model: E3S-VS1C42
Choose red, green light source of the 2 models.
Can detect a variety of colors.
Detection mode: diffuse reflection type.
Shape: vertical.
Connection mode: lead wire.
Detection distance: green light 12mm positive and negative 2mm.
Output mode: open collector output type, NPN output.
High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC two-wire / connector type.
Polarity: none.
Shape: shield, M30.
Detection range: 10mm.
Action mode: NO. Sensor type: Diffuse-reflective.
Sensing distance: 300 mm OMRON E3S-VS1C42.
Connection method: pre-wired.
Model: NPN output.
A new generation in sensing performance E3S-VS1C42
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models.
Models designed for special applications.
Non-stop detection.
High quality and reliability.
High EMC protection.
High light immunity.
Robust and waterproof housing OMRON E3S-VS1C42. Output configuration: DC switching NPN (normally open or closed selectable).
Sensing method: Through-beam.
Sensing distance: 100 cm.
Capable of Setting the Sensing Range.
Using an Ultrasonic Beam.
Ensures the stable detection of a variety of objects,
regardless of the color, transparency, or material.
(metallic or non-metallic) of the objects.
Limits the ultrasonic beam width to 8°, thus,
detecting minute objects as small as 2 x 2 cm OMRON E3S-VS1C42.
Detects objects smoothly while largely suppressing,
interference from background objects.
Sealed to resist dust and dirt and emits ultrasonic,
waves at a frequency of approximately 200 kHz,
thus providing high immunity from impact and,
environmental noise OMRON Identification sensor. Fitting materials: Stainless steel(SUS304).
Count: 1 .
Accessories: Description, Phillips screw Nut plat;
Material, Stainless steel Stainless steel;
Count, 2, 1 OMRON Identification sensor.
Applicable sensor (mounting pitch on sensor side): E3NC-SH250H,
E3NC-SH250, E3NC-SH100.
Page: Dimensions, 16. Type: Wide View/Single Function.
NPN.
Low-cost but advanced Smart.
Sensors combining benefits of OMRON Identification sensor.
optical and vision sensors.
Sensor integrated with light for easy installation.
Easy operation by selecting icons while watching.
LCD monitor.
Ultra-high speed response for fasst-moving E3S-VS1C42.
production lines. Appearance: Shielded, M18.
Sensing distance: 4 mm.
Output configuration: DC 2-wire, (3)-(4) pin arrangement.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation eeven with aluminum or iron chips sticking,
to the Sensor OMRON E3S-VS1C42.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC two-wire / connector type.
Polarity: none.
Shape: shield, M30.
Detection range: 10mm.
Action mode: NO. Sensor type: Diffuse-reflective.
Sensing distance: 300 mm OMRON E3S-VS1C42.
Connection method: pre-wired.
Model: NPN output.
A new generation in sensing performance E3S-VS1C42
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models.
Models designed for special applications.
Non-stop detection.
High quality and reliability.
High EMC protection.
High light immunity.
Robust and waterproof housing OMRON E3S-VS1C42. Output configuration: DC switching NPN (normally open or closed selectable).
Sensing method: Through-beam.
Sensing distance: 100 cm.
Capable of Setting the Sensing Range.
Using an Ultrasonic Beam.
Ensures the stable detection of a variety of objects,
regardless of the color, transparency, or material.
(metallic or non-metallic) of the objects.
Limits the ultrasonic beam width to 8°, thus,
detecting minute objects as small as 2 x 2 cm OMRON E3S-VS1C42.
Detects objects smoothly while largely suppressing,
interference from background objects.
Sealed to resist dust and dirt and emits ultrasonic,
waves at a frequency of approximately 200 kHz,
thus providing high immunity from impact and,
environmental noise OMRON Identification sensor. Fitting materials: Stainless steel(SUS304).
Count: 1 .
Accessories: Description, Phillips screw Nut plat;
Material, Stainless steel Stainless steel;
Count, 2, 1 OMRON Identification sensor.
Applicable sensor (mounting pitch on sensor side): E3NC-SH250H,
E3NC-SH250, E3NC-SH100.
Page: Dimensions, 16. Type: Wide View/Single Function.
NPN.
Low-cost but advanced Smart.
Sensors combining benefits of OMRON Identification sensor.
optical and vision sensors.
Sensor integrated with light for easy installation.
Easy operation by selecting icons while watching.
LCD monitor.
Ultra-high speed response for fasst-moving E3S-VS1C42.
production lines. Appearance: Shielded, M18.
Sensing distance: 4 mm.
Output configuration: DC 2-wire, (3)-(4) pin arrangement.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation eeven with aluminum or iron chips sticking,
to the Sensor OMRON E3S-VS1C42.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available.
...More relevant models >>>>