LK Automation Limited
E3JM-10S4 OMRON E3JM-10S4 Connection: terminal plate,
Brand:
OMRON
Name: AC and DC type photoelectric switch (power supply)
Model: E3JM-10S4
E3JM-10S4 detection methods: the firing pattern,
Connection: terminal plate,
Detection range: 10m.
Output status: ON into the light; light shading ON; switch conversion type.
Output: DC no contact.
2 types of cost reduction
...More relevant models >>>>
Name: AC and DC type photoelectric switch (power supply)
Model: E3JM-10S4
E3JM-10S4 detection methods: the firing pattern,
Connection: terminal plate,
Detection range: 10m.
Output status: ON into the light; light shading ON; switch conversion type.
Output: DC no contact.
2 types of cost reduction
Name: Cameras, Cameras with Intelligent Light Source and Lens.
Easy-to-use Windows®-based software that can provide,
more sophisticated functionality and capability to the,
F150-3 using a drag-and-drop, flow-chart like setup envi,
ronment requiring no programming skills. Appearance: M5.
Sensing distance: 1 OMRON E3JM-10S4. 2 mm.
Connecting method: Pre-wired Models (2 m).
Cable specifications: PVC(oil-resistant) E3JM-10S4
Operation mode: NC.
Wire color /pin arrangement: Brown: +V, Black: Output, Blue: 0 V.
Model: PNP output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5.4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available OMRON E3JM-10S4.
High-speed response frequency stably detects moving,
objects: 5 kHz max.
Four indicator lamps for easier indicator positioning.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube against wire,
breakage is available (M4, M5 only).
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables OMRON E3JM-10S4. Category: General purpose,
Control output: ON/OFF output,
Output mode: NPN output,
Simple and perfect optical fiber amplifier products,
High anti interference with optoelectronic IC technologyAppearance: Standard.
Sensing method: Through-beam type (with slot).
Cable length: 2 m.
Sensing distance: 5 mm (slot width) OMRON AC and DC type photoelectric switch (power supply).
configuration Output: Light-ON.
Indicator mode: No incident light.
Model: PNP output OMRON AC and DC type photoelectric switch (power supply).
Slim, Compact Photomicrosensor.
that is still easy to use.
Compact, thin profile enables dense mounting.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC. Appearance: Shielded, M18.
Sensing distance: 8 mm.
Output configuration: DC 2-wire (no polarity) OMRON AC and DC type photoelectric switch (power supply).
Operation mode: NO.
Spatter-resistant Fluororesin,
coated Proximity Sensor.
Superior spatter resistance.
Long Sensing-distance Models added for sensing,
distances up to 15 mm.
Pre-wirred Smartclick Connector Models are also available E3JM-10S4. Free change detection direction.
Detection direction can be according to the front, side (up and down, around 90 units) change.
Can be similar to the feeling of a limit switch insstallation OMRON E3JM-10S4.
Type: detection of variable terminal plate / DC type.
Shape: non shield.
Detection range: 30mm.
Output form: NO NPN + NC (dual output).
Easy-to-use Windows®-based software that can provide,
more sophisticated functionality and capability to the,
F150-3 using a drag-and-drop, flow-chart like setup envi,
ronment requiring no programming skills. Appearance: M5.
Sensing distance: 1 OMRON E3JM-10S4. 2 mm.
Connecting method: Pre-wired Models (2 m).
Cable specifications: PVC(oil-resistant) E3JM-10S4
Operation mode: NC.
Wire color /pin arrangement: Brown: +V, Black: Output, Blue: 0 V.
Model: PNP output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5.4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available OMRON E3JM-10S4.
High-speed response frequency stably detects moving,
objects: 5 kHz max.
Four indicator lamps for easier indicator positioning.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube against wire,
breakage is available (M4, M5 only).
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables OMRON E3JM-10S4. Category: General purpose,
Control output: ON/OFF output,
Output mode: NPN output,
Simple and perfect optical fiber amplifier products,
High anti interference with optoelectronic IC technologyAppearance: Standard.
Sensing method: Through-beam type (with slot).
Cable length: 2 m.
Sensing distance: 5 mm (slot width) OMRON AC and DC type photoelectric switch (power supply).
configuration Output: Light-ON.
Indicator mode: No incident light.
Model: PNP output OMRON AC and DC type photoelectric switch (power supply).
Slim, Compact Photomicrosensor.
that is still easy to use.
Compact, thin profile enables dense mounting.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC. Appearance: Shielded, M18.
Sensing distance: 8 mm.
Output configuration: DC 2-wire (no polarity) OMRON AC and DC type photoelectric switch (power supply).
Operation mode: NO.
Spatter-resistant Fluororesin,
coated Proximity Sensor.
Superior spatter resistance.
Long Sensing-distance Models added for sensing,
distances up to 15 mm.
Pre-wirred Smartclick Connector Models are also available E3JM-10S4. Free change detection direction.
Detection direction can be according to the front, side (up and down, around 90 units) change.
Can be similar to the feeling of a limit switch insstallation OMRON E3JM-10S4.
Type: detection of variable terminal plate / DC type.
Shape: non shield.
Detection range: 30mm.
Output form: NO NPN + NC (dual output).
...More relevant models >>>>