LK Automation Limited
E3JK-DR11-C 2M Built-in Power Supply Photoelectric Sensor OMRON E3JK-DR11-C 2M Output configu ration: Relay
Brand:
OMRON
Name: Built-in Power Supply Photoelectric Sensor
Model: E3JK-DR11-C 2M
Power supply voltage: AC/DC power supply selectable type.
Sensing method: Diffuse-reflective.
Sensing distance: 2.5 m.
Output configu ration: Relay.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
...More relevant models >>>>
Name: Built-in Power Supply Photoelectric Sensor
Model: E3JK-DR11-C 2M
Power supply voltage: AC/DC power supply selectable type.
Sensing method: Diffuse-reflective.
Sensing distance: 2.5 m.
Output configu ration: Relay.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC three wire / wire type.
Shape: non shield, M12.
Detection range: 5mm.
Output configuration: PNP.
Action mode: NO. Lite FZ5 sensor controller.
Appearance: box type OMRON E3JK-DR11-C 2M.
CPU:Lite controller.
Camera number: 2.
Output: PNP.
With the high accuracy of object detection, which can meet the demand of positioning control, the shape search E3JK-DR11-C 2M
The measurement results are converted to the control of the device and output.
Constitute the mechanical components can be easily connected.
No program can be simple design. Power supply: DC.
Output type: NPN.
High-accuracy Detection of Metal Workpiece Displacement OMRON E3JK-DR11-C 2M.
Sensor Heads support a wide variety of applications.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function.
Simple linearity compensation (teaching).
Easily perform calculation for two Sensors by using a Calculating Unit.
Prevent mutual interference for up to five Units by using a Calculating Unit OMRON E3JK-DR11-C 2M. Sensing method: Through-beam type (with slot).
Sensing distance: 5 mm (slot width).
Output type: NPN output.
Output configuration: Dark-ON.
Photomicrosensor with light,
modulation for reduced external,
light interference and a,
connector for easy maintenance.
Built-in connectors OMRON Built-in Power Supply Photoelectric Sensor.
Select from four easy-to-use shapes for efficient space,
utilization.
Connectors with locks for safety against vibration OMRON Built-in Power Supply Photoelectric Sensor.
Convenient mounting method using M3 screws.
Wide operating voltage range: 5 to 24 VDC. Appearance: 4 dia.
Sensing distance: 3 mm.
Connecting method: M8 Connector Models.
Cable specifications: --.
Operation mode: NO.
Wire color /pin arrangement: 1: +V, 3: 0 V, 4: Control output OMRON Built-in Power Supply Photoelectric Sensor.
Model: PNP output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5.4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available.
High-speed response ffrequency stably detects moving,
objects: 5 kHz max E3JK-DR11-C 2M.
Four indicator lamps for easier indicator positioning.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube againstt wire,
breakage is available (M4, M5 only) OMRON E3JK-DR11-C 2M.
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC three wire / wire type.
Shape: non shield, M12.
Detection range: 5mm.
Output configuration: PNP.
Action mode: NO. Lite FZ5 sensor controller.
Appearance: box type OMRON E3JK-DR11-C 2M.
CPU:Lite controller.
Camera number: 2.
Output: PNP.
With the high accuracy of object detection, which can meet the demand of positioning control, the shape search E3JK-DR11-C 2M
The measurement results are converted to the control of the device and output.
Constitute the mechanical components can be easily connected.
No program can be simple design. Power supply: DC.
Output type: NPN.
High-accuracy Detection of Metal Workpiece Displacement OMRON E3JK-DR11-C 2M.
Sensor Heads support a wide variety of applications.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function.
Simple linearity compensation (teaching).
Easily perform calculation for two Sensors by using a Calculating Unit.
Prevent mutual interference for up to five Units by using a Calculating Unit OMRON E3JK-DR11-C 2M. Sensing method: Through-beam type (with slot).
Sensing distance: 5 mm (slot width).
Output type: NPN output.
Output configuration: Dark-ON.
Photomicrosensor with light,
modulation for reduced external,
light interference and a,
connector for easy maintenance.
Built-in connectors OMRON Built-in Power Supply Photoelectric Sensor.
Select from four easy-to-use shapes for efficient space,
utilization.
Connectors with locks for safety against vibration OMRON Built-in Power Supply Photoelectric Sensor.
Convenient mounting method using M3 screws.
Wide operating voltage range: 5 to 24 VDC. Appearance: 4 dia.
Sensing distance: 3 mm.
Connecting method: M8 Connector Models.
Cable specifications: --.
Operation mode: NO.
Wire color /pin arrangement: 1: +V, 3: 0 V, 4: Control output OMRON Built-in Power Supply Photoelectric Sensor.
Model: PNP output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5.4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available.
High-speed response ffrequency stably detects moving,
objects: 5 kHz max E3JK-DR11-C 2M.
Four indicator lamps for easier indicator positioning.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube againstt wire,
breakage is available (M4, M5 only) OMRON E3JK-DR11-C 2M.
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables.
...More relevant models >>>>