LK Automation Limited LK Automation Limited
Brand: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Go Back >> Product Catalogues
E3FA-BP12 2M Simplicity OMRON E3FA-BP12 2M
Brand: OMRON
Name: Photoelectric sensors
Model: E3FA-BP12 2M
Sensor type: Transparent detected with P-opaquing function.
Sensing distance: 0.1 to 2 m with E39-RP1.
Connection method: pre-wired.
Model: PNP output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models.
Models designed for special applications.
Non-stop detection.
High quality and reliability.
High EMC protection.
High light immunity.
Robust and waterproof housing.

Appearance: Unshielded, M12.
Sensing distance: 12 mm.
Model: Operation mode, NC.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models. E3F3-D11M detection method: diffuse reflection type,
Wire lead out type,
Type: metal appearance; NPN output,
Threaded cylindrical photoelectric sensor, built-in amplifier,
Photoelectric sensor with proximity sensor appearance
High anti interference with optoelectronic -IC technologyField of view: Standard View OMRON E3FA-BP12 2M E3FA-BP12 2M
Number of pixels: 350,000 pixels.
Monochrome: PNP.
Field of view/Installation distance: Refer to figure 2 on p OMRON E3FA-BP12 2M. 20.
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all.
This Vision Sensor provides all of the best-selling,
features found in high-end models without the,
need as in vision system for a separate controller.
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series. E32-T16P type: special beam type; region detection,
Specialty: regional width 11mm,
Shape / detection distance (mm): 1500; 1100; 750 (300),
Bending radius (mm): R10 OMRON E3FA-BP12 2M.
Standard test object (minimum test object) (mm) 1: (0.2) 3,
Fiber element for meeting diversified needsItem: Fiber Adapter,
(between Sensor Head pre-wired cable and Extension Fiber Cable) OMRON Photoelectric sensors.
Cable length: --.
To achieve a compact Sensor Head and high-resolution measurements,
the ZW Series uses a white light confocal principle to detect objects OMRON Photoelectric sensors.
This principle is described below. Size: M30, Non-shielded.
Sensing distance: 20.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 44 (58)(See note OMRON Photoelectric sensors. ).
Output configuration: PNP.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Sensing method: Narrow-beam reflective.
Connection method: Pre-wired.
Sensing distance: 90±30 mm.
Model: NPN output.
Small 22 E3FA-BP12 2M. 5-mm-diameter Spot Ideal for.
Detecting Small Workpieces.
Tiny workpieces as little as 0.1 mm in diameter can be,
detected with the 2.5-mm-dia. spot.
The narrow beam enables sensing from small slots or holes.
The small spott of light enables visual checking of sensing,
spot position OMRON E3FA-BP12 2M.
IP67 degree of protection, mutual interference prevention,
and EN standard compliance.


...More relevant models >>>>
Last one: E3FA-BN12 2M
next one: E3FA-BN22