LK Automation Limited
E32-TC200 Specialty: M4 screw, OMRON E32-TC200
Brand:
OMRON
Name: Optical fiber sensor
Model: E32-TC200
E32-TC200 type: special beam type; long range / high function,
Specialty: M4 screw,
Shape / detection distance (mm): 4000; 4000; 2600 (1500),
Bending radius (mm): R25.
Standard test object (minimum test object) (mm) 1: 4 (0.1),
Fiber element for meeting diversified needs
...More relevant models >>>>
Name: Optical fiber sensor
Model: E32-TC200
E32-TC200 type: special beam type; long range / high function,
Specialty: M4 screw,
Shape / detection distance (mm): 4000; 4000; 2600 (1500),
Bending radius (mm): R25.
Standard test object (minimum test object) (mm) 1: 4 (0.1),
Fiber element for meeting diversified needs
High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC / wire type.
Polarity: none.
Shape: shield, M30.
Detection range: 10mm.
Action mode: NO. Stable detection of chip components in 0402 dimensions.
Minimum detection object 0 OMRON E32-TC200. 15mm (cube).
Built in small lens, light 7mm wide uniform light E32-TC200
Even smaller pieces will not be spared.
And, with a response rate of 135 s and other levels of the highest detection performance,
Even the latest 0402 size tiny chips are able to accurately capture.
Ultra small sensor head, can be installed into a small space.
When the electronic component grade sorting and the like are arranged in parallel, it is helpful to the miniaturization of the device OMRON E32-TC200.
Adjustable time timer.
Equipped with timer function can be set time.
Control device to transmit the signal to the back section.
In addition, due to the built-in counter function, therefore, you can also set the number of output signals.
Automatic compensation detecting state
Equipped with dust and dirt detection according to the amount of light to change light automatic compensation function OMRON E32-TC200.
Always maintain the detection performance in the best condition. Appearance: Shielded, M18.
Sensing distance: 4 mm.
Output configuration/Operation mode: DC 3-wire, NPN NO OMRON Optical fiber sensor.
A Proximity Sensor for Aluminum,
Brass and Other Non-ferrous Metals.
Iron Is Not Detected.
Non-ferrous metals, such as aluminum and brass, are detected OMRON Optical fiber sensor.
Ferrous metals, such as iron and nickel, are not detected.
Aluminum foil, however, cannot be detected. Size: M8, Shielded.
Sensing distance: 2.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 49 (65).
Output configuration: PNP.
Operation mode NO OMRON Optical fiber sensor.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels) E32-TC200.
Modular construction simplifies customization. Square pole type approach switch direct current three wire type.
Wide visual field of action indicator.
Adjusstable fixing hole OMRON E32-TC200.
Type: lead wire, wire length 2M.
Form: non shield, square cylinder.
Detection range: 5mm.
Output form: PNP.
Action status: NO.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC / wire type.
Polarity: none.
Shape: shield, M30.
Detection range: 10mm.
Action mode: NO. Stable detection of chip components in 0402 dimensions.
Minimum detection object 0 OMRON E32-TC200. 15mm (cube).
Built in small lens, light 7mm wide uniform light E32-TC200
Even smaller pieces will not be spared.
And, with a response rate of 135 s and other levels of the highest detection performance,
Even the latest 0402 size tiny chips are able to accurately capture.
Ultra small sensor head, can be installed into a small space.
When the electronic component grade sorting and the like are arranged in parallel, it is helpful to the miniaturization of the device OMRON E32-TC200.
Adjustable time timer.
Equipped with timer function can be set time.
Control device to transmit the signal to the back section.
In addition, due to the built-in counter function, therefore, you can also set the number of output signals.
Automatic compensation detecting state
Equipped with dust and dirt detection according to the amount of light to change light automatic compensation function OMRON E32-TC200.
Always maintain the detection performance in the best condition. Appearance: Shielded, M18.
Sensing distance: 4 mm.
Output configuration/Operation mode: DC 3-wire, NPN NO OMRON Optical fiber sensor.
A Proximity Sensor for Aluminum,
Brass and Other Non-ferrous Metals.
Iron Is Not Detected.
Non-ferrous metals, such as aluminum and brass, are detected OMRON Optical fiber sensor.
Ferrous metals, such as iron and nickel, are not detected.
Aluminum foil, however, cannot be detected. Size: M8, Shielded.
Sensing distance: 2.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 49 (65).
Output configuration: PNP.
Operation mode NO OMRON Optical fiber sensor.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels) E32-TC200.
Modular construction simplifies customization. Square pole type approach switch direct current three wire type.
Wide visual field of action indicator.
Adjusstable fixing hole OMRON E32-TC200.
Type: lead wire, wire length 2M.
Form: non shield, square cylinder.
Detection range: 5mm.
Output form: PNP.
Action status: NO.
...More relevant models >>>>