LK Automation Limited
E32-L86 OMRON E32-L86 Bending radius (mm): R25 Optical fiber sensor
Brand:
OMRON
Name: Optical fiber sensor
Model: E32-L86
E32-L86 type: special light beam type; limited reflection,
Specialty: thermal head: 200 c,
Bending radius (mm): R25.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needs
...More relevant models >>>>
Name: Optical fiber sensor
Model: E32-L86
E32-L86 type: special light beam type; limited reflection,
Specialty: thermal head: 200 c,
Bending radius (mm): R25.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needs
Appearance: Column type (flat-surface mounting).
Sensing distance: 50 mm.
Output configuration: 2-wire AC (normally open).
Long-distance Model with a Sensing,
distance of 50 mm. Appearance: Standard.
Sensing method: Through-beam type (with slot).
Cable length: 2 m.
Sensing distance: 5 mm (slot width) OMRON E32-L86.
configuration Output: Dark-ON.
Indicator mode: No incident light.
Model: PNP output E32-L86
Slim, Compact Photomicrosensor.
that is still easy to use.
Compact, thin profile enables dense mounting.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC. E3X-DA6TW-S amplifier unit
NPN outputE3F3-D32 detection method: diffuse reflection type,
Wire lead out type,
Type: Plastic appearance; PNP output,
Threaded cylindrical photoelectric sensor, built-in amplifier,
Photoelectric sensor with proximity sensor appearance
High anti interference with optoelectronic -IC technologySize: M12, Shielded OMRON E32-L86.
Sensing distance: 4.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 34 (48).
Output configuration: PNP.
Operation mode NC OMRON E32-L86.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels) OMRON Optical fiber sensor.
Modular construction simplifies customization. Sensing method: Convergent reflective.
Connection method: Pre-wired (2 m) OMRON Optical fiber sensor.
Sensing distance : 20 to 35 mm .
function Timer: Without .
Model: PNP output.
Reliable Detection Unaffected by PCB.
Holes or Notches.
High-limit E3S-LS3@ is suitable for incorporation in devices.
Wide-range E3S-LS3@W is ideal for detecting tall components,
mounted on boards OMRON Optical fiber sensor.
Timer function models available. A variety of applications can be more convenient and simple to solve the problem
Package must be performed to provide a software package.
Intelligent paacket ZX-SAM11 E32-L86.
To achieve a variety of workpiece count.
Intelligent packet ZX-SAM13 for detection of small segment difference
The foreign body on the surface of the vibrating object, the joint segment of the eccentric core operation iis poor, etc OMRON E32-L86. , can be set and extracted by the waveform.
Fiber roller seam detection burr belt of packaging paper tape with segment difference detection
Sensing distance: 50 mm.
Output configuration: 2-wire AC (normally open).
Long-distance Model with a Sensing,
distance of 50 mm. Appearance: Standard.
Sensing method: Through-beam type (with slot).
Cable length: 2 m.
Sensing distance: 5 mm (slot width) OMRON E32-L86.
configuration Output: Dark-ON.
Indicator mode: No incident light.
Model: PNP output E32-L86
Slim, Compact Photomicrosensor.
that is still easy to use.
Compact, thin profile enables dense mounting.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC. E3X-DA6TW-S amplifier unit
NPN outputE3F3-D32 detection method: diffuse reflection type,
Wire lead out type,
Type: Plastic appearance; PNP output,
Threaded cylindrical photoelectric sensor, built-in amplifier,
Photoelectric sensor with proximity sensor appearance
High anti interference with optoelectronic -IC technologySize: M12, Shielded OMRON E32-L86.
Sensing distance: 4.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 34 (48).
Output configuration: PNP.
Operation mode NC OMRON E32-L86.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels) OMRON Optical fiber sensor.
Modular construction simplifies customization. Sensing method: Convergent reflective.
Connection method: Pre-wired (2 m) OMRON Optical fiber sensor.
Sensing distance : 20 to 35 mm .
function Timer: Without .
Model: PNP output.
Reliable Detection Unaffected by PCB.
Holes or Notches.
High-limit E3S-LS3@ is suitable for incorporation in devices.
Wide-range E3S-LS3@W is ideal for detecting tall components,
mounted on boards OMRON Optical fiber sensor.
Timer function models available. A variety of applications can be more convenient and simple to solve the problem
Package must be performed to provide a software package.
Intelligent paacket ZX-SAM11 E32-L86.
To achieve a variety of workpiece count.
Intelligent packet ZX-SAM13 for detection of small segment difference
The foreign body on the surface of the vibrating object, the joint segment of the eccentric core operation iis poor, etc OMRON E32-L86. , can be set and extracted by the waveform.
Fiber roller seam detection burr belt of packaging paper tape with segment difference detection
...More relevant models >>>>