LK Automation Limited
E2EM-X8X1 2M Long-distance Proximity Sensor with reduced problems due to workpiece collisions OMRON E2EM-X8X1 2M
Brand:
OMRON
Name: Long-distance Proximity Sensor
Model: E2EM-X8X1 2M
Appearance: Shielded, M18.
Sensing distance: 8 mm.
Model: NO.
Long-distance Proximity Sensor.
Long-distance detection at up to 30 mm enables secure mounting,
with reduced problems due to workpiece collisions.
No polarity for easy wiring with DC 2-wire models.
Cable protector provided as a standard feature.
...More relevant models >>>>
Name: Long-distance Proximity Sensor
Model: E2EM-X8X1 2M
Appearance: Shielded, M18.
Sensing distance: 8 mm.
Model: NO.
Long-distance Proximity Sensor.
Long-distance detection at up to 30 mm enables secure mounting,
with reduced problems due to workpiece collisions.
No polarity for easy wiring with DC 2-wire models.
Cable protector provided as a standard feature.
Size: M12, Non-shielded.
Sensing distance: 8.0 mm.
Connection: Pre-wired.
Body material: Brass.
Thread length (overall length): 56 (72).
Output configuration: PNP.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor OMRON E2EM-X8X1 2M.
Problems such as the collision of workpieces are eliminated E2EM-X8X1 2M
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Appearance: Shielded.
Sensing distance: 5 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NO.
Standard Flat Sensors in.
Many Different Variations OMRON E2EM-X8X1 2M.
Only 6 mm thick yet provides a sensing,
distance of 3 mm (TL-W3MC1).
Aluminum die-cast models also available. Sensing method: Narrow-beam reflective.
Connection method: Pre-wired.
Sensing distance: 90±30 mm.
Model: NPN output.
Small 2.5-mm-diameter Spot Ideal for.
Detecting Small Workpieces.
Tiny workpieces as little as 0.1 mm in diameter can be,
detected with the 2.5-mm-dia OMRON E2EM-X8X1 2M. spot.
The narrow beam enables sensing from small slots or holes.
The small spot of light enables visual checking of sensing,
spot position.
IP67 degree of protection, mutual interference prevention,
and EN standard compliance. Specification: Resin, standard type OMRON Long-distance Proximity Sensor.
Shaft interior (tolerance *) exterior dia: 10 dia. (Height: 8), 22 dia.
Couplings.
Coupling Materials and Characteristics.
OMRON provides two types of couplings for different OMRON Long-distance Proximity Sensor.
application conditions: Resin and metal.
Select the best type for the application. Inductive Profoximity Sensor with.
Chemical-resistant Fluororesin Case.
Housing and mounting are made of Fluororesin resistant to chemicals.
Maximum sensing distance: 10 mm OMRON Long-distance Proximity Sensor. Applicable Sensor Head: ZX-LT1001/LT005.
Quantity: 1.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Appearance: Standard.
SSensing method: Through-beam type (with slot) E2EM-X8X1 2M.
Cable length: 2 m.
Sensing distance: 5 mm (slot width).
configuration Output: Dark-ON.
Indicator mode: Incident light.
Model: PNP output.
Slim, Compact Photomicrosensor.
that iis still easy to use OMRON E2EM-X8X1 2M.
Compact, thin profile enables dense mounting.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC.
Sensing distance: 8.0 mm.
Connection: Pre-wired.
Body material: Brass.
Thread length (overall length): 56 (72).
Output configuration: PNP.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor OMRON E2EM-X8X1 2M.
Problems such as the collision of workpieces are eliminated E2EM-X8X1 2M
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Appearance: Shielded.
Sensing distance: 5 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NO.
Standard Flat Sensors in.
Many Different Variations OMRON E2EM-X8X1 2M.
Only 6 mm thick yet provides a sensing,
distance of 3 mm (TL-W3MC1).
Aluminum die-cast models also available. Sensing method: Narrow-beam reflective.
Connection method: Pre-wired.
Sensing distance: 90±30 mm.
Model: NPN output.
Small 2.5-mm-diameter Spot Ideal for.
Detecting Small Workpieces.
Tiny workpieces as little as 0.1 mm in diameter can be,
detected with the 2.5-mm-dia OMRON E2EM-X8X1 2M. spot.
The narrow beam enables sensing from small slots or holes.
The small spot of light enables visual checking of sensing,
spot position.
IP67 degree of protection, mutual interference prevention,
and EN standard compliance. Specification: Resin, standard type OMRON Long-distance Proximity Sensor.
Shaft interior (tolerance *) exterior dia: 10 dia. (Height: 8), 22 dia.
Couplings.
Coupling Materials and Characteristics.
OMRON provides two types of couplings for different OMRON Long-distance Proximity Sensor.
application conditions: Resin and metal.
Select the best type for the application. Inductive Profoximity Sensor with.
Chemical-resistant Fluororesin Case.
Housing and mounting are made of Fluororesin resistant to chemicals.
Maximum sensing distance: 10 mm OMRON Long-distance Proximity Sensor. Applicable Sensor Head: ZX-LT1001/LT005.
Quantity: 1.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Appearance: Standard.
SSensing method: Through-beam type (with slot) E2EM-X8X1 2M.
Cable length: 2 m.
Sensing distance: 5 mm (slot width).
configuration Output: Dark-ON.
Indicator mode: Incident light.
Model: PNP output.
Slim, Compact Photomicrosensor.
that iis still easy to use OMRON E2EM-X8X1 2M.
Compact, thin profile enables dense mounting.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC.
...More relevant models >>>>