LK Automation Limited
E2E2-X10C1 OMRON Long-barrel Inductive Proximity Sensor E2E2-X10C1
Brand:
OMRON
Name: Long-barrel Inductive Proximity Sensor
Model: E2E2-X10C1
Appearance: Shielded, M30.
Sensing distance: 10 mm.
Model: Operation mode, NO.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models.
...More relevant models >>>>
Name: Long-barrel Inductive Proximity Sensor
Model: E2E2-X10C1
Appearance: Shielded, M30.
Sensing distance: 10 mm.
Model: Operation mode, NO.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models.
Slit width: Width 2 × 10 mm.
Installation procedure: Plug-in type.
Applicable type: E3Z-T@@. Appearance: Separate type.
Optical system: Through-beam.
Measuring width: 28mm.
Sensing distance: 0 to 500mm.
Resolution: 10µm.
Output type: PNP.
Measurable at any position.
The usual limitations, such as the ''measurement,
area being confined to the center''
or ''large errors due to positioning'',
that used to plague laser measuring sensors,
have now been overcome OMRON E2E2-X10C1 E2E2-X10C1 Measurements can be,
consistently taken within a 500 mm area,
whatever stage the work is at or whichever way it is inserted.
It can now be set to positions without interference from,
the work feed and without limitations of size of work area OMRON E2E2-X10C1. Appearance: Unshielded, M30.
Sensing distance: 30 mm.
Model: NO.
Long-distance Proximity Sensor.
Long-distance detection at up to 30 mm enables secure mounting,
with reduced problems due to workpiece collisions.
No polarity for easy wiring with DC 2-wire models.
Cable protector provided as a standard feature. Appearance: Shielded, M30.
Sensing distance: 12 mm.
Output configuration: DC 2-wire (polarity) OMRON E2E2-X10C1.
Operation mode: NO.
Proximity Sensor Ideal for the Food and Beverage Industry. Appearance: Shielded, M30.
Sensing distance: 8 mm.
Output configuration: DC 2-wire.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor OMRON Long-barrel Inductive Proximity Sensor.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available OMRON Long-barrel Inductive Proximity Sensor. E3JK-R2M2 detection method: Regression reflection type with M.S.R. function,
Connection mode: lead wire,
Detection range: 2.5m.
Output status: shading ON.
Output: relay,
2 types of cost reductionSensing method: Through-beam.
Connection method: Pre-wired Connector (M8, 4 pins) OMRON Long-barrel Inductive Proximity Sensor.
Sensing distance: 25 mm.
No. of opti- cal axes: 1 E2E2-X10C1.
Model: NPN output.
Photoelectric Sensor with Grooved.
Design and Easy Settings .
Groove-type Sensor with groove width of 25 mm.
Models are available with one or two light axes.
Models are available with M8 pre-wiired connectors OMRON E2E2-X10C1. Detection mode: diffuse reflection type.
Connection mode: lead type (2 m)
Detection range: red light 500mmmm.
Output mode: NPN output.
Installation procedure: Plug-in type.
Applicable type: E3Z-T@@. Appearance: Separate type.
Optical system: Through-beam.
Measuring width: 28mm.
Sensing distance: 0 to 500mm.
Resolution: 10µm.
Output type: PNP.
Measurable at any position.
The usual limitations, such as the ''measurement,
area being confined to the center''
or ''large errors due to positioning'',
that used to plague laser measuring sensors,
have now been overcome OMRON E2E2-X10C1 E2E2-X10C1 Measurements can be,
consistently taken within a 500 mm area,
whatever stage the work is at or whichever way it is inserted.
It can now be set to positions without interference from,
the work feed and without limitations of size of work area OMRON E2E2-X10C1. Appearance: Unshielded, M30.
Sensing distance: 30 mm.
Model: NO.
Long-distance Proximity Sensor.
Long-distance detection at up to 30 mm enables secure mounting,
with reduced problems due to workpiece collisions.
No polarity for easy wiring with DC 2-wire models.
Cable protector provided as a standard feature. Appearance: Shielded, M30.
Sensing distance: 12 mm.
Output configuration: DC 2-wire (polarity) OMRON E2E2-X10C1.
Operation mode: NO.
Proximity Sensor Ideal for the Food and Beverage Industry. Appearance: Shielded, M30.
Sensing distance: 8 mm.
Output configuration: DC 2-wire.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor OMRON Long-barrel Inductive Proximity Sensor.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available OMRON Long-barrel Inductive Proximity Sensor. E3JK-R2M2 detection method: Regression reflection type with M.S.R. function,
Connection mode: lead wire,
Detection range: 2.5m.
Output status: shading ON.
Output: relay,
2 types of cost reductionSensing method: Through-beam.
Connection method: Pre-wired Connector (M8, 4 pins) OMRON Long-barrel Inductive Proximity Sensor.
Sensing distance: 25 mm.
No. of opti- cal axes: 1 E2E2-X10C1.
Model: NPN output.
Photoelectric Sensor with Grooved.
Design and Easy Settings .
Groove-type Sensor with groove width of 25 mm.
Models are available with one or two light axes.
Models are available with M8 pre-wiired connectors OMRON E2E2-X10C1. Detection mode: diffuse reflection type.
Connection mode: lead type (2 m)
Detection range: red light 500mmmm.
Output mode: NPN output.
...More relevant models >>>>