LK Automation Limited LK Automation Limited
Brand: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Go Back >> Product Catalogues
E2A-M30KN20-M1-B1 OMRON Cylindrical Proximity Sensor OMRON E2A-M30KN20-M1-B1
Brand: OMRON
Name: Cylindrical Proximity Sensor
Model: E2A-M30KN20-M1-B1
Size: M30, Non-shielded.
Sensing distance: 20.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 44 (58)(See note.).
Output configuration: PNP.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization.

Power supply voltage: DC.
Sensing method: Retro-reflective with MSR function.
Sensing distance: 6 m[100 mm](When using E39-R1).
Output configu ration: PNP.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models) OMRON E2A-M30KN20-M1-B1.
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2 E2A-M30KN20-M1-B15 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC) OMRON E2A-M30KN20-M1-B1.
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available. Appearance: Shielded, M18.
Sensing distance: 4 mm.
Output configuration: DC 2-wire, (3)-(4) pin arrangement.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor.
Only the sensing object is detected OMRON E2A-M30KN20-M1-B1.
Pre-wired Smartclick Connector Models also available. Name: Liquid Leakage Sensing Band.
Ideal for harsh electrical room environments that are dusty and humid.
For installation in locations requiring insulated materials. Appearance: Flat Unshielded OMRON Cylindrical Proximity Sensor.
Sensing distance: 10 mm[4 to 10 mm *].
Output configuration: DC 3-wire NPN.
Model/Operation mode: NC.
Flat Capacitive Sensor with a OMRON Cylindrical Proximity Sensor.
Thickness of Only 10 mm.
Flat Sensor with excellent space efficiency.
(Model with built-in Amplifier is only 10 mm thick.)
Direct mounting onto a metallic surface is possible. A small, high resolution general type of hollow shaft with no need for coupling.
Incremental diameter (38 hollow shaft) OMRON Cylindrical Proximity Sensor.
With 8 shaft hole.
Corresponding supply voltage DC5 ~ 24V (open collector output type).
Outer diameter of 38, with high resolution 3600P/R.
Power supply voltage: DC5V.
Output form: linear drive output. Appearance: Shielded, M30.
Sensing distance: 10 mm.
Output: NPN.
Model: Operation mode NO.
Aluminum and Iron Both.
Detectable from Long Distances. Sensing method: Retro-reflective (without MSR function).
Connection method: Pre-wired (2 m).
Sensing distance: 500 mm (80 mm).
Model: NPN output.
Reliable Detection of Transparent,
Objects, Including Thinn-walled Clear,
Plastic Bottles E2A-M30KN20-M1-B1.
Uses OMRON''s unique optical system ("Inner View") that can,
detect various shapes of clear, plastic bottles.
Detects a wide range of bottles from 500-ml bottles to 2-l bottles,
and from single bottles to sets of stocked bottles OMRON E2A-M30KN20-M1-B1.
Provides a high degree of protection (IP67), mutual interference,
prevention, and EN standard compliance.


...More relevant models >>>>