LK Automation Limited LK Automation Limited
Brand: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Go Back >> Product Catalogues
D4SL-N2NFA-DN OMRON Miniature electromagnetic locking safety door switch D4SL-N2NFA-DN
Brand: OMRON
Name: Miniature electromagnetic locking safety door switch
Model: D4SL-N2NFA-DN
Release key type: general type (metal).
Connection mode: connector.
The solenoid voltage / indicator type: DC24V/ orange.
Lock / release mode: mechanical lock / electromagnetic release.
Contact composition (door open and close detection switch + lock control switch):6 contacts (2NC/1NO + 2NC/1NO).
Conduit size: G1/2.
6 contact electromagnetic lock safety door switch world minimum level.
Small electromagnetic lock safety door switch D4SL-N.
A touch of the 2 wiring way, can reduce the working hours.
Built in a variety of types of switches, applicable to all types of devices (you can choose 4 contacts, 5 contacts, 6 contacts).
Lock strength for a reassuring 1300N.
The insertion direction of the key can be changed without taking down the head.
Significantly reduce the solenoid current helps to reduce the cost of the power supply.
The sliding key unit of D4SL-NSK10-LK.
Using the lock key can prevent the locked in the dangerous area of the fence.
D4SL-N can be easily mounted on the side of 40mm aluminum frame.
Material for resin, the most suitable light weight door.

Release Key Type: Special (resin).
Wiring method: Connector.
Solenoid voltage/Indicator: 24VDC (Orange).
Lock and release type: Solenoid lock Mechanical release.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 6-contact Model,
Insert the built-in switch (N, P, Q or R) into the blank @ OMRON D4SL-N2NFA-DN.
Conduit size (See Note.): M20.
World''s smallest Class 6-contact Guard Lock D4SL-N2NFA-DN
Safety-door Switch.
.
Wiring time is reduced with two types of wiring.
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices.
(4-, 5-, and 6-contact models are available) OMRON D4SL-N2NFA-DN.
Key holding force of 1,300 N.
It is possible to change the key insertion point.
without detaching the head.
Drive solenoids directly from the Controller.
.
Lockout Key to prevent workers from becoming.
trapped inside the hazardous area.
The vertical D4SL Guard Lock Safety-door Switch,
can be easily mounted on 40 × 40 mm aluminum frames.
The plastic material makes the Slide Key suitable,
for lightweight doors OMRON D4SL-N2NFA-DN. Drive rod: plunger type.
Built in switch structure: 1NC/1NO (speed type).
Economical safety limit switch.
The standard gold plated contacts ensure high reliability of the contact.
Can be used for standard load and small load. Actuator: Adjustable roller lever.
Conduit openings: G1/2 (PF1/2) OMRON Miniature electromagnetic locking safety door switch.
2NC (Slow-action).
Robust safety limit switch with metal housing.
Slow-action and snap-action contact with,
certified direct opening operation certification OMRON Miniature electromagnetic locking safety door switch.
Direct opening mechanism (NC contacts only) added to,
enable opening contacts when faults occur, such as fused contacts.
Safety of lever settings ensured using a mechanism that,
engages a gear between the operating position indicator plate and the lever OMRON Miniature electromagnetic locking safety door switch.
Equipped with a mechanism that indicates the applicable,
operating zone, as well as push-button switching to control left and right motion D4SL-N2NFA-DN.
Head seal structure strengthened to improve seal properties.
(TÜV: IEC IP67, UL: NNEMA 3, 4, 4X, 6P, and 13) OMRON D4SL-N2NFA-DN.
Wide standard operating temperature range: –40 to 80°C (standard type).
Certified standards: UL, CSA, EN (TÜV), and CCC.


...More relevant models >>>>
Last one: D4SL-N Series
next one: D4SL-N2PFA-DN