Number of beams: 42.
Protective height: 635mm.
Model: PNP output.
Basic Type with a combination of.
performance and functionality.
Up to three sets of series-connected sensors.
The muting function is enabled simply with Muting Key Cap.
Comes standard with interlock and auxiliary output functions OMRON D4N-422H. Actuator: Roller plunger.
Conduit size: 2-conduit; M20.
Built-in switch mechanism: 1NC/1NO(Snap-action) D4N-422H
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement OMRON D4N-422H.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Type: Standard.
Sealing: Flux-tight.
Poles: 4 poles.
Contact configuration: DPST-NO, DPST-NC.
Rated voltage: 12, 18, 21, 24, 48, 110 VDC OMRON D4N-422H.
Compact, Slim Relays Conforming to,
EN Standards.
Relays with forcibly guided contacts,
(EN50205 Class A, certified by VDE).
Supports the CE marking of machinery (Machinery Directive).
Helps avoid hazardous machine status when used as part of,
an interlocking circuit OMRON Safety Limit Switch.
Four-pole and six-pole Relays are available.
The Relay’s terminal arrangement simplifies PWB pattern design OMRON Safety Limit Switch.
Reinforced insulation between inputs and outputs.
Reinforced insulation between some poles of different polarity. Actuator: Shaft.
Conduit size: 2-conduit; M20.
Built-in switch mechanism: 2NC/1NO (Slow-action).
Compact, Plastic-body Safety-door.
Hinge Switch Designed for Saving.
Space in Machines and Other OMRON Safety Limit Switch.
Equipment.
Lineup includes three contact models with 2NC/1NO and.
3NC contact forms in addition to the previous contact forms.
1NC/1NO, and 2NC. Models with MBB contacts are also available.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads. Direction of Operation Key insertion: Horizontal.
Cable length:: 5 m D4N-422H.
1NC/1NO(Slow-action).
Slim Safety Door Switches with IP67 Rating.
Slim design with a width of only 17 mm.
(three-contact models).
Reversible design allowing either front or rear mounting.
Built-in Switches with two- or thhree-terminal contact OMRON D4N-422H.
construction are available.
Operation Key with rubber mounting hole to absorb vibration and shock.
IP67 degree of protection.