LK Automation Limited
CL2Y8-TP1S2 Spring clip terminal type output module External connection: 2 wire MITSUBISHI CL2Y8-TP1S2
Brand:
MITSUBISHI
Name: Spring clip terminal type output module
Model: CL2Y8-TP1S2
Output type: transistor output, drain type.
Output points: 8 points.
OFF leakage current: 0.1mA.
Output protection function.
Rated load voltage / current: DC12V/DC24V/0.1A.
External connection: 2 wire.
Spring clip terminal.
Do not need to re tighten, suitable for wire specifications for 0.3~1.5MM square.
Terminal block is 2 piece structure.
An input module shared by the common terminal of the positive and negative.
The 8 point of the output module is appended to the source type.
Can be installed along the 6 direction.
...More relevant models >>>>
Name: Spring clip terminal type output module
Model: CL2Y8-TP1S2
Output type: transistor output, drain type.
Output points: 8 points.
OFF leakage current: 0.1mA.
Output protection function.
Rated load voltage / current: DC12V/DC24V/0.1A.
External connection: 2 wire.
Spring clip terminal.
Do not need to re tighten, suitable for wire specifications for 0.3~1.5MM square.
Terminal block is 2 piece structure.
An input module shared by the common terminal of the positive and negative.
The 8 point of the output module is appended to the source type.
Can be installed along the 6 direction.
Input type: DC input, negative public end.
Input points: 16 points.
Enter the response time: 1.5ms the following.
Rated input voltage / current: DC24V/5mA.
External connection: 4 wire.
Fast connector type.
Simple wiring through quick connector.
Can be installed along the 6 direction.
MITSUBISHI PLC program simulation debugging
The basic idea of program simulation debugging is,
In order to facilitate the form of simulation to generate the actual state of the scene,
Create the necessary environmental conditions for the operation of the program MITSUBISHI CL2Y8-TP1S2 CL2Y8-TP1S2
Depending on the way the field signals are generated,
The simulation debugging has two forms of hardware simulation and software simulation. Output type: transistor output, drain type MITSUBISHI CL2Y8-TP1S2.
Output points: 16 points.
OFF leakage current: 0.25mA.
Output protection function.
Rated load voltage / current: DC12V/DC24V/0.5A.
External connection: 1 wire.
According to the external connection mode and the external equipment input and output specifications,
Choose from a rich product lineup.
Finger protection through the upper part of the terminal,
The human body will not be exposed to live parts,
Therefore, the terminal station type remote I/O module can be directly mounted to the machine tool MITSUBISHI CL2Y8-TP1S2. The CC-Link-Anywire DB A20 bridge module.
Support Ver.2 CC-LINK. Input type: DC input, positive common end.
Input points: 8 points.
Enter the response time: 0.2ms the following MITSUBISHI Spring clip terminal type output module.
Rated input voltage / current: DC24V/5mA.
External connection: 3 wire.
Fast connector type MITSUBISHI Spring clip terminal type output module.
Simple wiring through quick connector.
Can be installed along the 6 direction.
MITSUBISHI PLC program simulation debugging
The basic idea of program simulation debugging is,
In order to facilitate the form of simulation to generate the actual state of the scene,
Create the necessary environmental conditions for the operation of the program MITSUBISHI Spring clip terminal type output module.
Depending on the way the field signals are generated,
The simulation debugging has two forms of hardware simulation and software simulation. Output type: transistor output, drain type.
Output points: 2 points.
OFF leaakage current: 0 CL2Y8-TP1S2. 1mA.
Output protection function: No.
Rated load voltage / current: DC24V/0.1A.
External connection: 2 wire.
Cable type.
Minimum size of industry.
Can be like a cable, placed in the online slot.
The communicatiion cable and the external equipment connecting cable is a type, and the wiring is simple MITSUBISHI CL2Y8-TP1S2.
Communication side, input and output side with cable (50cm).
Input points: 16 points.
Enter the response time: 1.5ms the following.
Rated input voltage / current: DC24V/5mA.
External connection: 4 wire.
Fast connector type.
Simple wiring through quick connector.
Can be installed along the 6 direction.
MITSUBISHI PLC program simulation debugging
The basic idea of program simulation debugging is,
In order to facilitate the form of simulation to generate the actual state of the scene,
Create the necessary environmental conditions for the operation of the program MITSUBISHI CL2Y8-TP1S2 CL2Y8-TP1S2
Depending on the way the field signals are generated,
The simulation debugging has two forms of hardware simulation and software simulation. Output type: transistor output, drain type MITSUBISHI CL2Y8-TP1S2.
Output points: 16 points.
OFF leakage current: 0.25mA.
Output protection function.
Rated load voltage / current: DC12V/DC24V/0.5A.
External connection: 1 wire.
According to the external connection mode and the external equipment input and output specifications,
Choose from a rich product lineup.
Finger protection through the upper part of the terminal,
The human body will not be exposed to live parts,
Therefore, the terminal station type remote I/O module can be directly mounted to the machine tool MITSUBISHI CL2Y8-TP1S2. The CC-Link-Anywire DB A20 bridge module.
Support Ver.2 CC-LINK. Input type: DC input, positive common end.
Input points: 8 points.
Enter the response time: 0.2ms the following MITSUBISHI Spring clip terminal type output module.
Rated input voltage / current: DC24V/5mA.
External connection: 3 wire.
Fast connector type MITSUBISHI Spring clip terminal type output module.
Simple wiring through quick connector.
Can be installed along the 6 direction.
MITSUBISHI PLC program simulation debugging
The basic idea of program simulation debugging is,
In order to facilitate the form of simulation to generate the actual state of the scene,
Create the necessary environmental conditions for the operation of the program MITSUBISHI Spring clip terminal type output module.
Depending on the way the field signals are generated,
The simulation debugging has two forms of hardware simulation and software simulation. Output type: transistor output, drain type.
Output points: 2 points.
OFF leaakage current: 0 CL2Y8-TP1S2. 1mA.
Output protection function: No.
Rated load voltage / current: DC24V/0.1A.
External connection: 2 wire.
Cable type.
Minimum size of industry.
Can be like a cable, placed in the online slot.
The communicatiion cable and the external equipment connecting cable is a type, and the wiring is simple MITSUBISHI CL2Y8-TP1S2.
Communication side, input and output side with cable (50cm).
...More relevant models >>>>