Adapter for EX module (5 / set)I/O expansion module, including the 8 point relay /1 public endOne end is a loose wire, which is used to carry out RS-232C connection between the host and LT.For connecting GP operation data with RS-422 and power /DIO terminals.The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication Proface CA8-ODP10-01 CA8-ODP10-01 Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 5 meters. Provide dust proof and moisture proof function when installing GP3000H conversion adapter to hard panel.The guide rail mounting adapter is suitable for the host module (PFXLM4B01DAC, PFXLM4B01DAK, PFXLM4B01DDC, PFXLM4B01DDK) without operating the display Proface CA8-ODP10-01. Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output. Up to 7 EX modules can be connected.LT4000M (module type DIO), PNP output, DC24V (host).When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function Proface CA8-ODP10-01. (1)Touch screen anti ultraviolet protective film (1 pieces).The main controller is connected to the man-machine interface of the host, for MPI communicationApplicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) Proface Screen protector. Apply to GLC-2600/2500Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.A veneer, for the GP4000 series back loading models of full flush (white, 1)A veneer, for the GP4000 series back loading models of full flush (white, 1)The main controller is connected to the man-machine interface for MPI communicationA veneer, for the GP4000 series back loading models of full flush (white, 1)Protection for GP rear connectors (large and small for each of the 1) Proface Screen protector Proface Screen proteector CA8-ODP10-01. GP3000H replacement label (5 sheets / set)Suitable for GLC2300 seriesUsed to prevent disconnection. (1 interface, 5 / set)A connector that connects the DIO interface for connecting an external I/O device (5 sets).The PC adapter for PCMCIA slot read CF card required Proface CA8-ODP10-01. Used to connect the 2-Port adapter to GP400010.4 inches (TFT), the replacement of the host backlight (1).