15 inches, GP installed to the hard panel to provide dust and moisture proof function.Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point NPN transistor output7.4 inches or larger, FLEX NETWORK GLC2300 connector (5 groups)Durable cable for connecting GP3000H adapter and GP3000H Proface CA7-TPPEN/ALL-01. 7.5 inches, GP installed to the hard panel to provide dust and moisture proof function CA7-TPPEN/ALL-01COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceStandard cable for connecting GP3000H adapter and GP3000H Proface CA7-TPPEN/ALL-01.
Length: 10 meters. 3.5 inch screen protective cover (1 pieces)5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Used to prevent disconnection. (1 interface, 5 / set)Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 5 meters Proface CA7-TPPEN/ALL-01. 10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).10.4 inches (STN), the replacement of the host backlight (2 / set) Proface Touch pen. Length: 5 meters.The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.The man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port Proface Touch pen. Used to convert the USB interface to the serial interface (RS-232C). A modem or bar code reader that can be connected to support RS-232C.15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1). Note: joints A and B are different, the joints C and D different Proface Touch pen. Touch panel operattion for RGB input modules (Master - from: Mini-B)Provide dust proof and moisture proof function when installing GP3000H conversion adapter to hard panel CA7-TPPEN/ALL-01. The main controller is connected to the man-machine interface of the hhost, for MPI communicationOne end is a loose wire, which is used to carry out RS-485 connection between the host and LT Proface CA7-TPPEN/ALL-01. Adapter for EX module (5 / set)