Use external output for the GP3000 series of auxiliary connectors (5 / sets).USB cable to prevent disconnection of the fastening clip (5 / set)COM1 interface with the cable for direct connection to the CPU series PLC ASuitable for GLC2300 seriesSuitable for A/B+ Type modelsPortable GP2000H series models accessories, RS-422 cable with D-Sub connector (3 meters) Proface CA7-FIXEXM-01. 15 inches, GP installed to the hard panel to provide dust and moisture proof function CA7-FIXEXM-017.4 inches or larger, for external reset input, NETWORK FLEX communication, audio output. AUX connector, L typeGP3000H replacement label (5 sheets / set)2 / setsScreen protection cover (1 pieces) for protecting screen against pollution of man-machine interface7 inch widescreen display module installed on the senior panel adapter GP-2400, GP-3400 and GP-4400 series of holes Proface CA7-FIXEXM-01. 10.4 inches (STN), the replacement of the host backlight (2 / set).Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master stationApply to GLC-2600/2500Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point NPN transistor outputA connector that connects the DIO interface for connecting an external I/O device (5 sets) Proface CA7-FIXEXM-01. One end is a loose wire, which is used to carry out RS-485 connection between the host and LT.For the DVI input to GP3000The three color tower lamp installed on the fixed panel is connected with the human machine interface through the USB interface Proface EX module fixing hook. The guide rail mounting adapter is suitable for the host module (PFXLM4B01DAC, PFXLM4B01DAK, PFXLM4B01DDC, PFXLM4B01DDK) without operating the display Proface EX module fixing hook. 15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1). Note: joints A and B are different, the joints C and D different Proface EX module fixing hook. OMRON SYSMAC series PLC or other main controller) connected to GP, length: 5 m.AUX connector for externnal output (5 / set) CA7-FIXEXM-01. 13 pin input connectors for HTB and 16 pin output connectors. (1 / set)Used in a variety of host and man-machine interface for RS-422 connectionMemory for extending EX GP-Pro alarm and character table functtions Proface CA7-FIXEXM-01. Extension cable for connecting USB (Mini-B) interface to front panel.For connecting GP operation data with D-Sub RS-232C and power /DIO terminals.