Used to connect to an external device (Type-A RS-422/RS-485 interface) to an external device (USB interface).4.3 Inch Touch Screen anti UV protective film (1 pieces).The MITSUBISHI A series PLC is connected to GP, length: 5 m.Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors Proface CA6-BLU10T-02 CA6-BLU10T-02
Length: 3 meters. Used to prevent disconnection. (1 interface, 5 / set)When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)A veneer, for the GP4000 series back loading models of full flush (white, 1)Connector for connecting a serial port (1)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceExtended cable for connecting USB (Type-A) (LT) interface Proface CA6-BLU10T-02. When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)Engineering documents created by the LT interface to download images and logic programming software through the USB interface Proface CA6-BLU10T-02. 12.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function.Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.The module is used for mounting on the back board of the GLC2000 series host computer Proface Replace with backlight. Then you can install the GP77R series or GLC100 series of medium size expansion module in the module on the outward side Proface Replace with backlight. GP2500S useTransmission screen data of the USB cable, PC (Type-A USB) to the man-machine interface USB (Mini-B).For the direct connection of the MITSUBISHI A series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function Proface Replace with backklight CA6-BLU10T-02. (1)10.4 inches and above, used to connect the power cord (5 / set).Used to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block.Adapter for convertingg an audio output portion of a AUX adapter into a Jack Pin socket Proface CA6-BLU10T-02. 15 inches, GP installed to the hard panel to provide dust and moisture proof function.