Provide dust proof and moisture proof function when installing GP3000H conversion adapter to hard panel.Expansion module for the GP3000 access to the PROFIBUS network and DP PROFIBUS master communicationDurable interface cable for connecting GP with external devices (such as the main controller), equipped with a universal filter Proface CA3-CBLQ-01. For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters CA3-CBLQ-0110.4 inches (TFT), replace the backlight (2 / set)COM1 interface with the cable for direct connection to the CPU series PLC AThe man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.7 inch widescreen display module installed on the senior panel adapter GP-2400, GP-3400 and GP-4400 series of holes Proface CA3-CBLQ-01. 5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Data transmission cable between host and LT series. Length: 5 meters.Portable GP2000H series models accessories, RS-232 single head cable (3 m).7.4 inches, installed to provide the function of dust and moistureWith the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models Proface CA3-CBLQ-01. (2 / set)Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.Touch panel operation for RGB input modules (Master - from: Mini-B)5.7 inches, GP installed to the hard panel to provide dust and moisture proof function Proface MITSUBISHI Q series CPU PLC connection cable (5 m). LT4000M (module type DIO), NPN output, DC24V (host) Proface MITSUBISHI Q series CPU PLC connection cable (5 m). COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)Used to connect to an external device (Type-A RS-422/RS-485 interface) to an external device (USB interface) Proface MITSUBISHI Q series CPU PLC connection cable (5 m). Engineering documents created by the LT interface to download images and loggic programming software through the USB interface CA3-CBLQ-01. Converting SIO to RS-422 terminal blockConnector for connecting DC power cord. (right angle, 5 / set)Suitable for LT4000M/GP4000M series modules, 5.7 inch. LT4000M (module type analog), NPN output, DC24V (host) Proface CA3-CBLQ-01. Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 10 meters.