LK Automation Limited
CA3-CBLFX/1M-01 Proface MITSUBISHI FX series CPU PLC connection cable (1 m) CA3-CBLFX/1M-01
Brand:
Proface
Name: MITSUBISHI FX series CPU PLC connection cable (1 m)
Model: CA3-CBLFX/1M-01
COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)
...More relevant models >>>>
Name: MITSUBISHI FX series CPU PLC connection cable (1 m)
Model: CA3-CBLFX/1M-01
COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)
Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters. COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interface5 / setsCOM2 adapter for converting the COM2 interface to the RS-422 terminal blockUsed to install the human machine interface to the fixed panel (2 / cover) Proface CA3-CBLFX/1M-01 CA3-CBLFX/1M-01 Used to output the image signal from the host computer to GPUSB cable clamp for preventing disconnection of connection (5 / set)B/B+/C FLEX NETWORK Type connector (5)Used to install the man-machine interface to the fixed panel. (4 / set)Touch screen anti ultraviolet protective film (1 pieces).Used in a variety of host and man-machine interface for RS-232C connectionTouch panel operation for RGB input modules (Master - from: Mini-B)For RGB input USB cable to prevent disconnection (2 / set)Extended cable for connecting USB (Type-A) (LT) interface Proface CA3-CBLFX/1M-01. 5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set).USB cable fastening clip (Type-A) for preventing disconnection of connection (5 / set) Proface CA3-CBLFX/1M-01. Transmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)Portable GP2000H series models accessories, RS-232 single head cable (10 m).Length: 5 meters.One end is a loose wire, which is used to carry out RS-232C connection between the host and LT.The man-machine interface directly connected MITSUBISHI electric PLC Q series CPU programming port Proface MITSUBISHI FX series CPU PLC connection cable (1 m) Proface MITSUBISHI FX series CPU PLC connection cable (1 m). The PC adapter for PCMCIA slot read CF card required.Direct interface Matsushita Electric PLC FP series CPU port.GLC2300 is not availableWhen the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)Used to connect to an external device (Type-A RS-422/RS-485 interface) to an external device (USB interface) Proface MITSUBISHI FX series CPU PLC connection cable (1 m). For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters CA3-CBLFX/1M-01. Length: 5 meters.Suitable for LT4000M/GP4000M series modules, 5.7 inch. Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interrface512MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card Proface CA3-CBLFX/1M-01.
Length: 3 meters. COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interface5 / setsCOM2 adapter for converting the COM2 interface to the RS-422 terminal blockUsed to install the human machine interface to the fixed panel (2 / cover) Proface CA3-CBLFX/1M-01 CA3-CBLFX/1M-01 Used to output the image signal from the host computer to GPUSB cable clamp for preventing disconnection of connection (5 / set)B/B+/C FLEX NETWORK Type connector (5)Used to install the man-machine interface to the fixed panel. (4 / set)Touch screen anti ultraviolet protective film (1 pieces).Used in a variety of host and man-machine interface for RS-232C connectionTouch panel operation for RGB input modules (Master - from: Mini-B)For RGB input USB cable to prevent disconnection (2 / set)Extended cable for connecting USB (Type-A) (LT) interface Proface CA3-CBLFX/1M-01. 5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set).USB cable fastening clip (Type-A) for preventing disconnection of connection (5 / set) Proface CA3-CBLFX/1M-01. Transmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)Portable GP2000H series models accessories, RS-232 single head cable (10 m).Length: 5 meters.One end is a loose wire, which is used to carry out RS-232C connection between the host and LT.The man-machine interface directly connected MITSUBISHI electric PLC Q series CPU programming port Proface MITSUBISHI FX series CPU PLC connection cable (1 m) Proface MITSUBISHI FX series CPU PLC connection cable (1 m). The PC adapter for PCMCIA slot read CF card required.Direct interface Matsushita Electric PLC FP series CPU port.GLC2300 is not availableWhen the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)Used to connect to an external device (Type-A RS-422/RS-485 interface) to an external device (USB interface) Proface MITSUBISHI FX series CPU PLC connection cable (1 m). For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters CA3-CBLFX/1M-01. Length: 5 meters.Suitable for LT4000M/GP4000M series modules, 5.7 inch. Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interrface512MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card Proface CA3-CBLFX/1M-01.
...More relevant models >>>>
Related download