Use external output for the GP3000 series of auxiliary connectors (5 / sets).Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 10 meters. Colorful LED switch with USB interface.Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output Proface CA3-CBL422-01 CA3-CBL422-01 Up to 7 EX modules can be connected.GP3000H replacement label (5 sheets / set)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories Proface CA3-CBL422-01. Slave station module for connecting support for CANopenWhen the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces).3.8 inches, GP installed to the hard panel to provide dust and moisture proof function.Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable. (5 / set)Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor outputUsed for surface protection of man-machine interface from oil and chemical pollution (5 / set) Proface CA3-CBL422-01. Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master stationConverting 2 analog signals into digital signalsFor the operation screen (5 pieces) (GP3000H standard) Proface RS-422 cable (5 m) Proface RS-422 cable (5 m). Touch screen anti ultraviolet protective film (1 pieces).15 inches, GP installed to the hard panel to provide dust and moisture proof function.Provide dust proof and moisture proof function when installing GP3000H conversion adapter to hard panel.For 5.7 inch models, for fixing the hooks of the three EX modules Proface RS-422 cable (5 m). 7.4 inches, replace the backlight (1 / set)1-0 DVI sstandard (DVI-D 24 pin convex connector)For 5 CA3-CBL422-01. 7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.Used to display analog RGB (2 channels) on the GP3000For 5.7 inch models, cconnect the connector to the DIO interface Proface CA3-CBL422-01. For connecting external I/O devices. (5 / set)Connector for connecting DC power cord. (right angle, 5 / set)