LK Automation Limited
CA2-ISOALL422-01 RS-422 isolation module Proface CA2-ISOALL422-01
Brand:
Proface
Name: RS-422 isolation module
Model: CA2-ISOALL422-01
...More relevant models >>>>
Name: RS-422 isolation module
Model: CA2-ISOALL422-01
The main controller is connected to the man-machine interface of the host, for MPI communicationWith the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)SD memory card (4GB, MLC, CLASS4).The PC adapter for PCMCIA slot read CF card required.The nut for mounting the display module (10 / set) Proface CA2-ISOALL422-01. Direct interface Matsushita Electric PLC FP series CPU port CA2-ISOALL422-01Use external output for the GP3000 series of auxiliary connectors (5 / sets).10.4 inches (TFT), the replacement of the host backlight (1).Portable GP2000H series models accessories, RS-232 single head cable (10 m).Apply to GLC-2600/2500Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors Proface CA2-ISOALL422-01.
Length: 10 meters. Expansion module for the GP3000 access to the PROFIBUS network and DP PROFIBUS master communicationReplaceable anti fouling film for protecting screen protective film (5 sheets / cover).GP4000 series back mounted model of waterproof rubber gasket. (1)Digital small keyboard with USB interface.Suitable for GLC2300 seriesPortable GP2000H series models accessories, RS-232 cable with D-Sub connector (3 meters) Proface CA2-ISOALL422-01. AUX connector for external output (5 / set).Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceLT4000M (module type analog), NPN output, DC24V (host) Proface RS-422 isolation module. Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.Disposable battery (1 blocks) for backing up clock data Proface RS-422 isolation module. 13 pin input connectors for HTB and 16 pin output connectors. (1 / set)256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.LT fasteners installed on the control panel (4 / set)5 Proface RS-422 isolation module. 7 inches thin film used for surface protection of man-machine interrface from fingerprints, water droplets, dust and oil pollution (5 / set) CA2-ISOALL422-01. For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Etherneet: Jack RJ-45 (Modular), other: terminal block Proface CA2-ISOALL422-01. The man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port.
Length: 10 meters. Expansion module for the GP3000 access to the PROFIBUS network and DP PROFIBUS master communicationReplaceable anti fouling film for protecting screen protective film (5 sheets / cover).GP4000 series back mounted model of waterproof rubber gasket. (1)Digital small keyboard with USB interface.Suitable for GLC2300 seriesPortable GP2000H series models accessories, RS-232 cable with D-Sub connector (3 meters) Proface CA2-ISOALL422-01. AUX connector for external output (5 / set).Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceLT4000M (module type analog), NPN output, DC24V (host) Proface RS-422 isolation module. Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.Disposable battery (1 blocks) for backing up clock data Proface RS-422 isolation module. 13 pin input connectors for HTB and 16 pin output connectors. (1 / set)256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.LT fasteners installed on the control panel (4 / set)5 Proface RS-422 isolation module. 7 inches thin film used for surface protection of man-machine interrface from fingerprints, water droplets, dust and oil pollution (5 / set) CA2-ISOALL422-01. For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Etherneet: Jack RJ-45 (Modular), other: terminal block Proface CA2-ISOALL422-01. The man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port.
...More relevant models >>>>