LK Automation Limited
A22RE-M-11-C OMRON A22RE-M-11-C
Brand:
OMRON
Name: Emergency stop button switch
Model: A22RE-M-11-C
Operation: press the lock with 40 top rotation reduction.
Contact structure: SPST-NO/SPST-NC.
Suitable for installation in the phi 22 panel cutting holes in.
The forced off structure can be contact welding off circuit.
Simply use the swing bar, you can easily install the closed block.
Two switch units are installed in series, which can greatly improve the wiring efficiency.
The switch unit standard finger protection structure.
Easy installation of round or Y type compression connector.
...More relevant models >>>>
Name: Emergency stop button switch
Model: A22RE-M-11-C
Operation: press the lock with 40 top rotation reduction.
Contact structure: SPST-NO/SPST-NC.
Suitable for installation in the phi 22 panel cutting holes in.
The forced off structure can be contact welding off circuit.
Simply use the swing bar, you can easily install the closed block.
Two switch units are installed in series, which can greatly improve the wiring efficiency.
The switch unit standard finger protection structure.
Easy installation of round or Y type compression connector.
Number of beams: 199.
Protective height: 2000mm.
Model: NPN output.
Easy-to-use Safety Sensor Ideal for.
Simple On/Off Detection Applications.
Provides simple safety functions - saving TCO.
by reducing errors.
Simple wiring with only 4 wires.
Fast response time of 5 ms. Name: Safety Network Controllers OMRON A22RE-M-11-C.
No. of I/O points: Safety inputs, 40; Test outputs, 8; Safety outputs, 8 A22RE-M-11-C
Unit version: 2.0.
Achieve Safety Control through,
Programming.
Compact Safety Controller.
The NE1A-SCPU01-V1 provides 16 built-in safety inputs,
and 8 built-in safety outputs.
The NE1A-SCPU02 provides 40 built-in safety inputs and,
8 built-in safety outputs.
Reduced wiring with safety networks. Connect up to 32,
Safety Terminals OMRON A22RE-M-11-C.
Monitor the safety system from Standard Controllers,
across the network.
ISO13849-1 (PLe) and IEC 61508 SIL3 certification. Release Key Type: Standard (metal).
Wiring method: Terminal block.
Solenoid voltage/Indicator: 24VDC (Orange).
Lock and release type: Solenoid lock Mechanical release.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 5-contact Model,
Insert the built-in switch (E, F, G or H) into the blank @ OMRON A22RE-M-11-C.
Conduit size (See Note.): M20.
World''s smallest Class 6-contact Guard Lock.
Safety-door Switch.
.
Wiring time is reduced with two types of wiring OMRON Emergency stop button switch.
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices OMRON Emergency stop button switch.
(4-, 5-, and 6-contact models are available).
Key holding force of 1,300 N.
It is possible to change the key insertion point.
without detaching the head.
Drive solenoids directly from the Controller.
.
Lockout Key to prevent workers from becoming OMRON Emergency stop button switch.
trapped inside the hazardous area.
The vertical D4SL Guard Lock Safety-door Switch,
can be easily mounted on 40 × 40 mm aluminum frames.
The plastic material makes the Slide Key suitable,
for lightweight doors. Safety sensors to detect contacts by.
mounting to moving parts of hazards.
Conforms to PLe/Safety Category 3 in combination with the,
dedicated controller.
(applied when innternal relays with forcibly guided contacts,
disable hazard source directly) A22RE-M-11-C.
Simple one-unit structure integrating sensor and cover.
Resistant to the side force.
Can be used in various applications.
Sensor length: 150 mm too 6,100 mm, Height: 34 mm to 80 mm OMRON A22RE-M-11-C.
Models with sealing covers for doors are provided(SGE-245L).
Certified standard: EN1760-2 (Safety Edge Standard).
Protective height: 2000mm.
Model: NPN output.
Easy-to-use Safety Sensor Ideal for.
Simple On/Off Detection Applications.
Provides simple safety functions - saving TCO.
by reducing errors.
Simple wiring with only 4 wires.
Fast response time of 5 ms. Name: Safety Network Controllers OMRON A22RE-M-11-C.
No. of I/O points: Safety inputs, 40; Test outputs, 8; Safety outputs, 8 A22RE-M-11-C
Unit version: 2.0.
Achieve Safety Control through,
Programming.
Compact Safety Controller.
The NE1A-SCPU01-V1 provides 16 built-in safety inputs,
and 8 built-in safety outputs.
The NE1A-SCPU02 provides 40 built-in safety inputs and,
8 built-in safety outputs.
Reduced wiring with safety networks. Connect up to 32,
Safety Terminals OMRON A22RE-M-11-C.
Monitor the safety system from Standard Controllers,
across the network.
ISO13849-1 (PLe) and IEC 61508 SIL3 certification. Release Key Type: Standard (metal).
Wiring method: Terminal block.
Solenoid voltage/Indicator: 24VDC (Orange).
Lock and release type: Solenoid lock Mechanical release.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 5-contact Model,
Insert the built-in switch (E, F, G or H) into the blank @ OMRON A22RE-M-11-C.
Conduit size (See Note.): M20.
World''s smallest Class 6-contact Guard Lock.
Safety-door Switch.
Wiring time is reduced with two types of wiring OMRON Emergency stop button switch.
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices OMRON Emergency stop button switch.
(4-, 5-, and 6-contact models are available).
Key holding force of 1,300 N.
It is possible to change the key insertion point.
without detaching the head.
Drive solenoids directly from the Controller.
Lockout Key to prevent workers from becoming OMRON Emergency stop button switch.
trapped inside the hazardous area.
The vertical D4SL Guard Lock Safety-door Switch,
can be easily mounted on 40 × 40 mm aluminum frames.
The plastic material makes the Slide Key suitable,
for lightweight doors. Safety sensors to detect contacts by.
mounting to moving parts of hazards.
Conforms to PLe/Safety Category 3 in combination with the,
dedicated controller.
(applied when innternal relays with forcibly guided contacts,
disable hazard source directly) A22RE-M-11-C.
Simple one-unit structure integrating sensor and cover.
Resistant to the side force.
Can be used in various applications.
Sensor length: 150 mm too 6,100 mm, Height: 34 mm to 80 mm OMRON A22RE-M-11-C.
Models with sealing covers for doors are provided(SGE-245L).
Certified standard: EN1760-2 (Safety Edge Standard).
...More relevant models >>>>
Related download