LK Automation Limited
A1SJ71E71N-B5T When the programmer input programinto the user program memory, MITSUBISHI A1SJ71E71N-B5T
Brand:
MITSUBISHI
Name: Ethernet module
Model: A1SJ71E71N-B5T
Ethernet Ethernet module 10BASE-T/10BASE5.
MITSUBISHI PLC is the main product in the production of MITSUBISHI motor in Dalian.
It uses a kind of programmable memory for its internal storage procedures,
Execute logic operation, sequence control, timing, counting and arithmetic operations, user oriented instruction,
And through digital or analog input / output control of various types of machinery or production process.
When the programmer input programinto the user program memory,
Then CPU according to the function of the system (the system program memory to explain the compiler),
Translate the user program into PLC internally recognized by the user to compile the program.
...More relevant models >>>>
Name: Ethernet module
Model: A1SJ71E71N-B5T
Ethernet Ethernet module 10BASE-T/10BASE5.
MITSUBISHI PLC is the main product in the production of MITSUBISHI motor in Dalian.
It uses a kind of programmable memory for its internal storage procedures,
Execute logic operation, sequence control, timing, counting and arithmetic operations, user oriented instruction,
And through digital or analog input / output control of various types of machinery or production process.
When the programmer input programinto the user program memory,
Then CPU according to the function of the system (the system program memory to explain the compiler),
Translate the user program into PLC internally recognized by the user to compile the program.
Interface: RS232C.
Transmission distance: 15 meters.
A1SJ71UC24-R2/R4/PR computer communication components can communicate with PLC, such as computers and other external intelligent devices, and the components are as follows:
Full / half duplex transmission.
4 special communication protocols.
No protocol and bidirectional mode MITSUBISHI A1SJ71E71N-B5T.
Protocol selection switch function.
The optional baud rate, the highest 19 A1SJ71E71N-B5T2K.
Since the echo diagnostic test. Type of input: DC leakage.
Input points: 32 points.
Input voltage: DC12/24.
Input current: 3/7mA.
Output type: transistor drain type.
Output points: 32 points.
Common public end points: 32.
PLC is introduced by the relay control technology after the development of micro processing technology,
Can be easily and reliably used for switching control MITSUBISHI A1SJ71E71N-B5T.
As the analog quantity can be converted into digital quantity, the number of digital quantity is just a number of switching value,
Therefore, after the conversion of analog, PLC can also be reliable for processing control.
Because the continuous production process often has the analog quantity, the analog quantity control is sometimes called process control MITSUBISHI A1SJ71E71N-B5T.
Analog quantity is not electricity, and PLC can only handle digital quantity, quantity of electricity.
All to realize the conversion between them to have the sensor, the analog quantity into a number of power MITSUBISHI Ethernet module.
If this power is not standard, but also through the transmitter,
The non-standard power into a standard electrical signal, such as 1-5V, 4-20mA, 0-10V, etc MITSUBISHI Ethernet module. .
At the same time, there is also an analog input unit (A/D),
Transform these standard electrical signals into digital signals,
The analog output unit (D/A), in order to transform the digital quantity after PLC processing into analog quantity -- standard electric signal MITSUBISHI Ethernet module.
So the standard telecommunication number, the conversion between the number of operations to use a variety of computing A1SJ71E71N-B5T.
This requires the resolution of the analog unit and the standard electrical signal. Using A6SIM-X64Y64 simulation I/O module in the system before the connection can be carried oout to control the process of debugging MITSUBISHI A1SJ71E71N-B5T.
The simulation unit consists of 16 blocks of 4 switches and 4 LED LEDs. SRAM memory card.
RAM capacity: 256KB.
Transmission distance: 15 meters.
A1SJ71UC24-R2/R4/PR computer communication components can communicate with PLC, such as computers and other external intelligent devices, and the components are as follows:
Full / half duplex transmission.
4 special communication protocols.
No protocol and bidirectional mode MITSUBISHI A1SJ71E71N-B5T.
Protocol selection switch function.
The optional baud rate, the highest 19 A1SJ71E71N-B5T2K.
Since the echo diagnostic test. Type of input: DC leakage.
Input points: 32 points.
Input voltage: DC12/24.
Input current: 3/7mA.
Output type: transistor drain type.
Output points: 32 points.
Common public end points: 32.
PLC is introduced by the relay control technology after the development of micro processing technology,
Can be easily and reliably used for switching control MITSUBISHI A1SJ71E71N-B5T.
As the analog quantity can be converted into digital quantity, the number of digital quantity is just a number of switching value,
Therefore, after the conversion of analog, PLC can also be reliable for processing control.
Because the continuous production process often has the analog quantity, the analog quantity control is sometimes called process control MITSUBISHI A1SJ71E71N-B5T.
Analog quantity is not electricity, and PLC can only handle digital quantity, quantity of electricity.
All to realize the conversion between them to have the sensor, the analog quantity into a number of power MITSUBISHI Ethernet module.
If this power is not standard, but also through the transmitter,
The non-standard power into a standard electrical signal, such as 1-5V, 4-20mA, 0-10V, etc MITSUBISHI Ethernet module. .
At the same time, there is also an analog input unit (A/D),
Transform these standard electrical signals into digital signals,
The analog output unit (D/A), in order to transform the digital quantity after PLC processing into analog quantity -- standard electric signal MITSUBISHI Ethernet module.
So the standard telecommunication number, the conversion between the number of operations to use a variety of computing A1SJ71E71N-B5T.
This requires the resolution of the analog unit and the standard electrical signal. Using A6SIM-X64Y64 simulation I/O module in the system before the connection can be carried oout to control the process of debugging MITSUBISHI A1SJ71E71N-B5T.
The simulation unit consists of 16 blocks of 4 switches and 4 LED LEDs. SRAM memory card.
RAM capacity: 256KB.
...More relevant models >>>>
Related download