The ultra small size, high performance and rich models.
5.5mm ultra small built-in amplifier.
Maximum detection distance 2.5mm. Workpiece shaking can also be stable detection.
Response frequency 1kHz.
Low consumption current.
Category: DC 3 wire type.
Shape: non shield.
Detection surface: below E2E-X5MF1 2M.
Detection range: 2.5mm.
Output form: NPN.
Action mode: NO. Power supply: 24 VDC.
Output type: PNP E2E-X5MF1 2M
ZG2 debut!
Achieving stable measurement.
through innovative technology. Type: square.
Screen mode: no segmentation.
Output: DPDT.
Power supply voltage: DC12V.
Contact type: standard load (AC250V, 3A; DC30V, 3A) E2E-X5MF1 2M.
Operation: alternating action (self retaining).
Operation Department color: White (using yellow and green LED) .
In the touch and the ability to protect than OMRON''s previous models have improved.
The micro volume design of 23mm is realized.
Micro design and unique combination of soft sensing.
LED has five colors (red, yellow, green, white, and blue).
Built in basic switch improves touch E2E-X5MF1 2M.
Built in basic switches in the previous model based on the OMRON to improve the protection .
Chip LED to produce a uniform surface brightness.
From the front panel installation, more convenient. Ratings: Standard load; 5 A at 250 VAC, 4 A at 30 VDC.
Cable: SJT(O) cable *3.
Actuator: Roller lever.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Type: rectangle.
Screen mode: level 2.
Output: DPDT.
Power supply voltage: DC24V.
Contact type: standard load (AC250V, 3A; DC30V, 3A).
Operation: alternating action (self retaining).
Operating above color: blue.
Color: red.
In the touch and the ability to protect than OMRON''s previous models have improvedd .
The micro volume ddesign of 23mm is realized OMRON E2E-X5MF1 2M.
Micro design and unique combination of soft sensing.
LED has five colors (red, yellow, green, white, and blue).
Built in basic switch improves touch.
Built in basic switches in the previous modell bbased on the OMRON to improve the protection OMRON E2E-X5MF1 2M.
Chip LED to produce a uniform surface brightness.
From the front panel installation, more convenient.
E2E-X5MF1 2M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E2E-X5MF1 2M&select=5