Time specification: Inverse type.
Current setting range: 20 to 65 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Automatic (See note.).
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage E3T-FD11-M1TJ 0.3M Price.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase E3T-FD11-M1TJ 0.3M
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation E3T-FD11-M1TJ 0.3M Price.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions . Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Optical system: Diffuse reflective E3T-FD11-M1TJ 0.3M Price.
Beam shape: Line beam.
Sensing distance: 100±40 mm.
Resolution: 16 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website . Type: Twin-connector.
Terminal Block: Terminal block with M3.5 screws.
Connector: Flat Cable Connectors*1.
No. of poles: 40.
Simplifies Connector and terminal,
block replacement, and requires less,
in-panel wiring.
Mount to DIN Track or via screws.
MIL Flat Cable Connectors and Multi-pole, Square,
Connectors are standard.
Terminal blocks available with either M3 or M3.5 screws.
Connecting Cables for Programmable Controllers,
available (sold separately). Name: HFU with Programless Communications *1.
Power supply voltage: 24 VDC supplied from the End Unit.
No. of control points: None.
Control outputs 1 and 2: None.
Control outputs 3 and 4: None.
Auxiliary output: Transistor output: 4 points (sinking).
Functions: burnout Heater alarm, None; Event inputs, 4.
Communications functions: Port C: RS-422,
From End Unit: Port A: RS-485.
Input type: No input.
Terminal: M3 terminal.
In-panel Temperature Controller with Flexible,
Modular Design and Wide Integration with Host,
Devices.
The compact modular structure enables construction of temperature,
systems optimally suited to the application.
Connection can be made to a Programmable Controller without any,
programming required, reducing the number of steps required in ladder,
programming design.
One fully universal-input Unit includes a thermocouple, platinum-resistance,
thermometer, and analog input for easy selection and reduced inventory,
requirements.
Connecct directly to the G3ZA Multii-channel Power Controller using,
optimum cycle control for high-accuracy regulation with minimal noise OMRON E3T-FD11-M1TJ 0.3M.
Autotuning (AT) can be used for independent heating/cooling PID control.
Self-tuning (ST) can be used to calculaatee the PID constants with the step,
response method OMRON E3T-FD11-M1TJ 0.3M.
Up to 16 Temperature Controllers can be connected to a single DeviceNet,
Communications Unit.

E3T-FD11-M1TJ 0.3M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E3T-FD11-M1TJ 0.3M&select=5