LK Automation Limited LK Automation Limited
Brand Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Home >> Price
OMRON E2E-X7D1-M1J 0.3M Price E2E-X7D1-M1J 0.3M
OMRON E2E-X7D1-M1J 0.3M
Size: 48 x 24mm.
Control output 1: voltage output (SSR driver).
Control output 2:--.
Auxiliary output: 2 points.
Power supply voltage: AC/DC24V.
Terminal type: PUSH-IN fastening terminal table type.
Input category: full range multi input.
Heater break, SSR fault detection function: -.
Communication: - E2E-X7D1-M1J 0.3M Price.
Event input: 1 points.
A small body of 48 * 24mm specifications on the condensation operation, E5_C series of high performance E2E-X7D1-M1J 0.3M
Slender body width 48mm * 24mm * 90mm high depth,
The most suitable for small devices / physical and chemical equipment, etc..
Although the small size, but also through the character of the high 10 E2E-X7D1-M1J 0.3M Price. 5mm white PV display to achieve high recognition.
The terminal stage is adopted to disassemble and assemble the structure, which improves the maintenance performance .
The connection method can be selected from a screw terminal and a PUSH-IN fastening terminal.
High speed sampling of 50ms is realized.
Easy to connect with PLC through no program communication E2E-X7D1-M1J 0.3M Price.
The use of electric communication conversion Village (sold separately) connected to the computer after,
No power connection can be set .
It can be easily set by CS-Thermo (sold separately). Actuator: One-way roller arm lever (vertical).
Conduit size: 1-conduit; Pg13.5.
Built-in switch mechanism: 2NC(Snap-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Ratings: 0.1 A at 125 VAC.
Cable: VCTF oil-resistant cable*.
Actuator: Plastic rod.
Cable length : 3m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulatiing material .
Cable lengthhs of 3 and 5 m available on standard models OMRON E2E-X7D1-M1J 0.3M.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
connfiirmation of operation OMRON E2E-X7D1-M1J 0.3M.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)
E2E-X7D1-M1J 0.3M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E2E-X7D1-M1J 0.3M&select=5


...more relevant model market price >>>>
Related products
OMRON
Standard Proximity Sensor
E2E-X7D1-N-Z 2M
OMRON Standard Proximity Sensor E2E-X7D1-N-Z 2M
Appearance: M18. Sensing distance: 7 mm
OMRON
Standard Proximity Sensor
E2E-X7D1-M1GJ-Z 0.3M
OMRON Standard Proximity Sensor E2E-X7D1-M1GJ-Z 0.3M
Appearance: M18. Sensing distance: 7 mm
OMRON
Standard Proximity Sensor
E2E-X7D1S-M1-Z
OMRON Standard Proximity Sensor E2E-X7D1S-M1-Z
Appearance: M18. Sensing distance: 7 mm
OMRON
Standard Proximity Sensor
E2E-X7D1-M1G-Z
OMRON Standard Proximity Sensor E2E-X7D1-M1G-Z
Appearance: M18. Sensing distance: 7 mm