Classification: Analog input.
I/O points: 4 inputs (Resolution: 6, 000).
Performs Calculations on Analog Values within the Slave Itself.
Also Provides High Resolution at 1/30,000 (Full Scale) and,
Support for a Wide Variety of Data Sampling.
Equipped with the standard Smart Slave functions that provide powerful,
preventative maintenance and troubleshooting capabilities OMRON E6C3-CWZ3XH 2000P/R 2M.
Sampling data can be analyzed internally to provide a low-cost scheduler function E6C3-CWZ3XH 2000P/R 2M
Equipped with functions such as the scaling function, peak/bottom hold;
top/valley hold; comparator function, cumulative counter, and derivative,
calculation function OMRON E6C3-CWZ3XH 2000P/R 2M.
Two I/O points can be allocated to any two of the following values: analog,
input, peak/bottom, top, valley, or rate-of-change . Values without an,
allocated I/O point can be read with message communications. Appearance: Shielded, M12.
Sensing distance: 4 mm.
Output configuration: DC 2-wire (no polarity).
Operation mode: NO.
Spatter-resistant Fluororesin,
coated Proximity Sensor OMRON E6C3-CWZ3XH 2000P/R 2M.
Superior spatter resistance.
Long Sensing-distance Models added for sensing,
distances up to 15 mm .
Pre-wired Smartclick Connector Models are also available. Number of beams: 41.
Protective height: 1020mm.
Model: NPN output.
Basic Type with a combination of.
performance and functionality.
Up to three sets of series-connected sensors.
The muting function is enabled simply with Muting Key Cap.
Comes standard with interlock and auxiliary output functions. Actuator: Roller lever (metal lever, resin roller).
Conduit size: 2-conduit; G1/2.
Built-in switch mechanism: 1NC/1NO(Snap-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Appearance: Round/Full-guard type LED lighting,
(without Voltage Reduction Unit) A22L-G.
Output: SPST-NO.
Lighting: LED.
Operating voltage: 6 VAC/VDC.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit E6C3-CWZ3XH 2000P/R 2M.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounteed using either open-type (fork-type) or closed-type E6C3-CWZ3XH 2000P/R 2M.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models).
E6C3-CWZ3XH 2000P/R 2M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E6C3-CWZ3XH 2000P/R 2M&select=5