Case color: Light gray.
Lighting method: LED; 24 VDC.
Display color symbol: R.O.G.W.
Large Rectangular-bodied Indicators.
Excellent illumination with even surface brightness.
Three-color models (green, orange, red; chameleon lighting),
included in lineup. Box protection class: plastic, IP00.
Terminal size: M5 OMRON E6C3-AB5C 8P/R 2M.
Line diameter: 14 square mm.
Weight: 1.8kg.
Used to reduce the noise from the power cord to the frequency converter or from the frequency converter to the power line E6C3-AB5C 8P/R 2M
Try to be close to the transducer for connection. Input capacity: 16 points.
Internal I/O common: PNP.
ON voltage: 15 VDC min OMRON E6C3-AB5C 8P/R 2M.
(between each input terminal and the G terminal)
OFF voltage: 5 VDC max.
(between each input terminal and the G terminal)
OFF current: 1 . 0 mA max.
Input current: 6.0 mA max./input (at 24-VDC),
3.0 mA min./input (at 17-VDC).
ON delay: 0.1 ms max.
OFF delay: 0.2 ms max.
Input filter value: Without filter, 0.5 ms, 1 ms,
2 ms, 4 ms, 8 ms, 16 ms, 32 ms. (Default setting: 1 ms)
Number of circuits per common: 8 points/common OMRON E6C3-AB5C 8P/R 2M.
Input indicators: LED display (yellow).
Isolation method: Photocoupler isolation .
I/O power supply method: Supply by I/O power supply.
Input device supply current: 100 mA/point.
Unit power supply current consumption: 90 mA max.
(for 20.4 to 26.4-VDC power supply voltage)
I/O power supply current consumption: 5 mA max.
(for 20.4 to 26.4-VDC power supply voltage)
Weight: 370 g max.
Expansion functions: No.
Short-circuit protection function: No.
A common terminal is provided for each contact.
It eliminate the needs for relay terminal blocks.
It is unnecessary to share the common terminal,
among multiple contacts.
Easy-to-find wiring locations.
Detachable screw terminal block facilitates the maintenance.
Input response time can be switched for high-speed processing.
Selectable node address setting methods: setting with rotary,
switch and with tool software.
When setting the nodes with rotary switch, setting is easy and,
node identification becomes possible for maintenance. Improved update. Reduce standby power consumption, and then achieve lightweight.
Standby power consumption reduced to 85% of the company''s previous products. (61F-GN)
The quality is reduced to less than 85% of the company''s previous products. (61F-G3N, G4N)
With LED action display function, so that the state of action at aa glance .
By improviing the reliability of internal relays (tiny load 1mA DC5V), the PLC input becomes possible E6C3-AB5C 8P/R 2M.
The electrode side terminals and other wiring terminals are separated, so the wiring operation is simple.
Installation method can chooosse the JEM agreement, DIN guide rail installation, screw installation in 3 ways E6C3-AB5C 8P/R 2M.
Relay unit.
Product Name: 61F-11_ unit * 1.
Purpose: General use.
E6C3-AB5C 8P/R 2M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E6C3-AB5C 8P/R 2M&select=5