Model: A7BS.
Classification (See note 1.): Snap-in (front mounting).
Character height: Decimal: 4.8 mm Hexadecimal: 3.2 mm.
Terminals: Solder terminals *1.
Color: Light gray.
Output code number: 07 (binary coded decimal, with component adding provision) *3.
Wide Range of Locking-type.
Models Available OMRON E2E2-X10MC2-M1.
Character height of 4.8 or 3.2 mm makes for easy-to,
view display.
Installation is easy with snap-in mounting E2E2-X10MC2-M1
The series includes a complete range of locking-type,
models that prevent accidental operation. I/O Terminal Cover For 20-pin block, standard C500-COV13Appearance: Knob-type Selector Switch A22W,
LED voltage-reduction lighting (without Voltage Reduction Unit) OMRON E2E2-X10MC2-M1.
Number of notches: 2 notches .
Resetting method: Manual.
Output: SPST-NO + SPST-NC.
Operating voltage: 100 VAC.
Illumination color: R (red); Y (yellow); G (green); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
Lever for easily mounting and removing the Switch Unit.
Finger protection mechanism on Switch Unit provided as a standard feature OMRON E2E2-X10MC2-M1.
Use 25-dia. ring to install in 25-dia. panel cutouts .
Mounted using either open-type (fork-type) or closed-type,
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Number of beams: 32.
Protective height: 299mm.
Model: PNP output.
Basic Type with a combination of.
performance and functionality.
Up to three sets of series-connected sensors.
The muting function is enabled simply with Muting Key Cap.
Comes standard with interlock and auxiliary output functions. Case color: Black.
Control output: Voltage output (for driving SSR).
Control mode *1: Standard.
No. of auxiliary outputs: --.
Detection of heater burnout, SSR failure, and heater overcurrent: --.
No. of event inputs: --.
Transfer output *2: --.
Communi cations: --.
Previous model: Thermocouple input, E5GN-QTC;
Resistance thermometer input, E5GN-QP.
New 48 x 24-mm Basic Temperature,
Controller with Enhanced Functions and,
Performance. Improved Indication Accuracy,
and Preventive Maintenance Function.
Indication Accuracy.
Thermocouple input: ±0.3% of PV (previous models: ±0.5%),
Pt input: ±0.2% of PV (previous models: ±0.5%),
Analog input: ±0.2% FS (previous models: ±0.5%),
Models are available with screw terminal blocks or screwless,
clamp terminal blocks.
A PV/SV-status display function can be set to automatically alternate,
between displayinng the status of thhe Temperature Controller (auto/
manual, RUN/STOP, and alarms) and the PV or SV E2E2-X10MC2-M1.
Preventive maintenance for relays in the Temperature,
Controller using a Control Output ON/OFF Counter.
Switch the PV display between three colorrs E2E2-X10MC2-M1.
Compatible with Support Software (CX-Thermo version 4.2 or higher).
Eleven-segment displays.
Models are available with one or two alarm outputs.
E2E2-X10MC2-M1 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E2E2-X10MC2-M1&select=5