Input type: PNP input type.
Event input terminal 5 points (HOLD, RESET) equipped with.
External power supply DC12V80mA.
Note: K3HB-RPB-A, K3HB-RNB-A is not equipped with event input.
No output: -.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC100 ~ 240V.
Measurement of 2 points through the speed, time, or cycle of the digital time interval table OMRON D4E-1E10N.
Action determine the color, can switch the green / Red 2 kinds of color display D4E-1E10N
Measurement of wide range of pulse interval time.
Measuring, calculating and displaying the pulse interval between 2 points.
Pulse interval measurement range, the maximum measurable range from 10ms to 3200s OMRON D4E-1E10N.
6 measurement methods, including 2Contact type: Standard load (250 VAC, 2 A; 125 VDC 0 . 4 A).
Operation: Alternate operation (Self-holding).
Output: DPDT.
Lighting: Incandescent lamp, 14 VAC/VDC.
Operation Unit color symbol: Enter the desired color symbol for the,
Pushbutton in @ R (Red); Y (Yellow); G (Green); A (Blue); W (White).
Pushbutton Switch Series with OMRON D4E-1E10N.
Square 40-mm Body.
Combines miniature design with distinct but soft sense of operation .
Easy panel mounting from the front and simple lamp replacement.
without tools. Actuator: Fork lever lock (right operation).
Conduit size: 1-conduit; M20.
Built-in switch mechanism: 1NC/1NO MBB (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Category: external supply 100mA DC5V type.
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
DeviceNet; DeviceNet:--.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
To support the sensor innput, the presssure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified D4E-1E10N.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipppeed with the sub pressure gauge for monitoring the operation trend D4E-1E10N.
External event input can be applied to a variety of measurement and identification
D4E-1E10N Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=D4E-1E10N&select=5